Standardization in the field of safety, EMC, EMF, energy efficiency and environmental aspects of transformers, reactors, power supply units, and combinations thereof. The standardization does not cover transformers, reactors and power supply units intended to be a part of distribution networks (covered by TC 14).
TC 96 has group safety function in accordance with IEC Guide 104 for transformers other than those intended to supply distribution networks, in particular transformers and power supply units intended to allow the application of protective measures against electric shock as defined by TC 64, with no limitation of rated output power, but in certain cases including limitation of voltage.
The general limitations for voltages are:
- rated supply voltage not exceeding 1 000 V a.c.;
- rated output voltage not exceeding 1 000 V a.c. or 1 500 V ripple free d.c.; however, internal voltages may exceed 1 000 V a.c. or 1 500 V ripple free d.c. For high-voltage applications, other than distribution networks (covered by TC 14), the rated output voltage can exceed 1 000 V a.c. or 1 500 V ripple free d.c. but the no load output voltage shall not exceed 15 000 V a.c. or 15 000 V d.c.
The general limitations for the rated output are:
- The maximum rated output depends on the type of transformer or linear power supply unit does in most cases not exceed 25 kVA for single-phase products and 40 kVA for three phase products;
- the maximum rated output does not exceed 1 kVA for both single-phase and three phase Switch Mode Power Supplies;
- the general limitations for the rated core power are 25 kVA for single-phase auto transformers and 40 kVA for three phase auto transformers;
- the general limitations for the rated power are 50 kvar for single-phase reactors and 80 kvar for three phase reactors. For special transformers, reactors and power supply units and combinations thereof there are no limitation of rated output, rated core power and rated power.
Apply to this committee
Apply to this committee:
Step 1: Select one of the links above to fill out the application form.
- If you are a Standards Council of Canada (SCC) member, assessor or staff member, select the “Sign in with SCC” button to complete the form.
- If you have signed up with SCC using your email address, select the “Login with your SCC guest account” button to complete the form.
- If you are new to SCC, you need to create an account with us. Select the button “Create a new guest account.” After your request is approved, our team will activate your account, then send you a link to the committee application form.
Step 2: Complete the questions on the form and attach:
- your resumé / curriculum vitae (CV)
- a motivation letter on how your experience aligns with the committee’s scope
Step 3: Our Member Services team will review your application and reach out with our decision.
Step 4: Our team will onboard successful candidates.
Thank you for your interest in becoming a subject matter expert representing Canada on its mirror committee to the international technical committee of the International Organization for Standardization (ISO) or the International Electrotechnical Commission (IEC).
Sharing your time and expertise as a volunteer with our standardization community is vital to sustaining Canada’s future prosperity.
As a member, you will:
- network with experts from different backgrounds
- gain access to industry insights, trends and best practices that will help your professional development
- explore how standardization can support your industry
- exchange knowledge to boost your organization's competitive edge