Search

ISO/TR 27809:2007 considers the control measures required to ensure patient safety in respect to health software products. It does not apply to software which is: necessary for the proper application of a medical device or an accessory to a medical device or a medical device in its own right. ISO/TR 27809:2007 is aimed at identifying what standards might best be used or created, and their…

Demonstrates how to estimate the uncertainty of steady-state temperature and humidity conditions in temperature and humidity chambers. Since this is inextricably linked to the methods of measurement, these are also described. This standard is equally applicable to all environmental enclosures, including rooms or laboratories. The methods used apply both to temperature chambers and combined…

This National Standard of Canada is equivalent to International Standard IEC 60044-8:2002. 1 Scope 1.1 General This part of IEC 60044 applies to newly manufactured electronic current transformers having an analogue voltage output or a digital output, for use with electrical measuring instruments and electrical protective devices at nominal frequencies from 15 Hz to 100 Hz. NOTE…

This National Standard of Canada is equivalent to International Standard ISO/IEC 11179-2:2005. 1 Scope This part of ISO/IEC 11179 restates and elaborates on the procedures and techniques of ISO/IEC 11179-3:2003 for registering classification schemes and classifying administered items in an MDR. All types of administered items can be classified, including object classes, properties,…

The global automotive industry is increasingly dependent on electronic product data to design and produce vehicles. Because of that dependency, problems with the quality of product data have led to problems in developing and producing products. When its member organisations recognised the problem, the Strategic Automotive product data Standards Industry Group (SASIG) decided the most effective…

This National Standard of Canada is based on International Standard CEI/IEC 61496-2:1997. 1 Scope This clause of part 1 is replaced by the following: This part of IEC 61496 specifies requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) for the safeguarding of machinery, employing active opto-electronic protective devices (AOPDs) for the…

This National Standard of Canada is equivalent to International Standard ISO/IEC TR 15446:2004. 1 Scope This document provides guidance relating to the construction of Protection Profiles (PPs) and Security Targets (STs) that are intended to be compliant with ISO/IEC 15408 (the "Common Criteria"). As such, the document is primarily aimed at those who are involved in the…

This National Standard of Canada is equivalent to International Standard ISO/IEC TR 21000-1:2004. 1 Scope This Technical Report has been prepared within ISO/IEC JTC 1/SC 29/WG 11 to reflect the progress made on the definition of the MPEG-21 Multimedia Framework. This progress is a result of the combination of WG 11's efforts to standardise the parts of the multimedia framework where…

Defines a set of modeling rules for writing Verilog® HDL descriptions for synthesis. Adherence to these rules guarantees the interoperability of Verilog HDL descriptions between register-transfer level synthesis tools that comply to this standard. The standard de.nes how the semantics of Verilog HDL are used, for example, to describe level- and edge-sensitive logic. It also describes the syntax…

This National Standard of Canada is equivalent to International Standard ISO/IEC 18019:2004. 1 Scope This International Standard gives guidelines for the design and preparation of user documentation for application software. It describes how to establish what information users need, how to determine the way in which that information should be presented to the users, and how then to prepare the…