Search

Il s’agit d’une norme binationale des ULC/UL et les exigences contenues dans la norme CAN/ULC-S139 sont identiques à celles de la deuxième édition de la norme ANSI/UL 2196 qui est utilisée aux États-Unis. Il y a certaines d’entre elles sont propres à l’un ou à l’autre des pays et ces exigences sont identifié comme étant propres à chaque pays. L’objectif de cette norme est d’évaluer l’…

IEC 62841-3-12:2017 applies to transportable threading machines. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in Annex K. This standard deals with the hazards presented by tools which are encountered by all…

IEC 62841-2-17:2017 applies to routers intended for cutting slots into or shaping the edge of various materials. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the…

1.1 Applicability This Standard applies to limit state design, fabrication, erection, and inspection of aluminum alloy members and assemblies a) intended to comply with building codes such as the National Building Code of Canada (NBCC); or b) not addressed by another CSA Group standard. When this Standard is referenced by other CSA Group standards (e.g., product standards), the requirements…

ISO 9170-1:2017 is intended especially to ensure the gas-specific assembly, mechanical resistance, flow, leakage and pressure drop of terminal units and to prevent their interchange between different gases and services and applies to terminal units: a) intended for use in medical gas pipeline systems in accordance with ISO 7396‑1; b) used as pressure outlets on pressure regulators in…

IEC 62271-1:2017 applies to AC switchgear and controlgear designed for indoor and/or outdoor installation and for operation at service frequencies up to and including 60 Hz and having rated voltages above 1 000 V. This document applies to all high-voltage switchgear and controlgear except as otherwise specified in the relevant IEC standards for the particular type of switchgear and controlgear…

This Standard sets forth the minimum requirements for containment sumps, and associated sump fittings and accessories (products) intended for below- or at-grade use as an enclosure for housing of, and access to, underground piping, connector piping, and other fueling system components (such as pumps, valves, sensors, wiring, etc.) in addition to temporary containment of typical liquid fuels as…

1.1 This Standard specifies the requirements for 600 V single-conductor, thermoplastic-insulated wires and cables, for use as follows: a) In Canada, in accordance with CSA C22.1, Canadian Electrical Code (CE Code), Part I; b) In Mexico, in accordance with NOM-001-SEDE, Standard for Electrical Installations; and c) In the United States, in accordance with ANSI/NFPA 70, National Electrical Code…

This standard specifies the requirements for metal cable trays and associated fittings designed for use in accordance with the Canadian Electrical Code (CE Code), Part I, and the National Electrical Code® (NEC).

1.1 This Standard applies to portable type gas camp lights for use: a) with propane, butane, liquefied petroleum gas or any combination thereof; and b) outdoors only. 1.2 Lights and components employing materials or having forms of construction differing from those detailed in these provisions may be examined and tested according to the intent of the provisions and if found to be…