Meters for Flammable and Combustible Liquids and LP-Gas
1 Scope
1.1 These requirements cover:
a) Meters for flammable and combustible liquids, of the type and size commonly used in the
assembly of motor fuel dispensing devices; and
b) Meters for liquefied petroleum gas (LP-Gas), of the type and size commonly used in the
assembly of motor fuel dispensing devices and tank trucks
The meters are of the positive liquid displacement type.
NOTE: For…
Compteurs de liquides inflammables et combustibles et de gaz de pétrole liquéfié
1 Domaine d’application
1.1 Ces exigences couvrent :
a) les compteurs pour liquides inflammables et combustibles, du type et de la taille couramment
utilisés dans l’assemblage des dispositifs de distribution de carburant pour moteurs; et
b) les compteurs de gaz de pétrole liquéfié (GPL), du type et de la taille couramment utilisés dans
l’assemblage des appareils de distribution de carburant…
General requirements for lighting systems - Safety
IEC TS 63117:2021(E) specifies the safety requirements of lighting systems at the system level, applicable when designing a lighting system.
A lighting system comprises a set of products. Safety requirements of the products are not covered in this document, but specified in product safety standards.
NOTE For emergency lighting systems, national or regional regulations provide relevant…
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current swit...
IEC 62271-1:2017+A1:2021 applies to AC switchgear and controlgear designed for indoor and/or outdoor installation and for operation at service frequencies up to and including 60 Hz and having rated voltages above 1 000 V.
This document applies to all high-voltage switchgear and controlgear except as otherwise specified in the relevant IEC standards for the particular type of switchgear and…
Household and similar electrical appliances — Safety — Part 2-89: Particular requirements for commer...
1 Scope
This clause of Part 1 is replaced by the following.
This part of IEC 60335 specifies safety requirements for electrically operated commercial refrigerating
appliances and ICE-MAKERS that have an incorporated motor-compressor or that are supplied in two units
for assembly as a single appliance in accordance with the instructions (split system).
NOTE 101 Examples of appliances that are…
This National Standard of Canada applies to four grades of gasoline to which no lead or phosphorus compounds
have been added. They are intended for use in spark-ignition engines under a wide range of climatic conditions.
This standard is not intended to apply to the mixing of oxygenated gasolines and gasolines, either at the point of
retail sale or after the point of retail sale.
Gasoline…
Oxygenated automotive gasoline containing ethanol (E1-E10 and E11-E15)
This National Standard of Canada applies to two types of oxygenated gasoline, E1-E10 (“Type A”) and E11-E15
(“Type B”), to which no lead or phosphorus compounds have been added, and in which the oxygenate consists
essentially of ethanol. They are intended for use in spark-ignition engines under a wide range of climatic conditions.
Each type may be supplied in one of four grades which differ in…
Special requirements for plumbing installations in health care facilities
1 Scope
1.1 General
This Standard addresses the special requirements of plumbing systems pertinent to the design, construction, operation, and maintenance of health care facilities (HCFs). This Standard specifies requirements for the following in HCFs:
a)
water supply systems, including cold water systems and hot water systems;
b)
plumbing fixtures and fittings;
c)
drainage systems;
d)…
1 Scope
1.1 These requirements cover single pole locking-type separable attachment plugs, cord connectors,
panel inlets, and panel outlets, adapters, and accessories, rated up to a maximum of 800 amperes and up
to 600 volts ac or dc and not intended for connection or disconnection under load conditions.
1.2 These devices are intended to provide power from feeders or branch circuits, or are…
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60204-1:2016+A1:2021 applies to electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine. This sixth edition cancels…