This National Standard of Canada is equivalent to American
National Standard ANSI/BHMA A156.10-1985 in total, without any
modification. Requirements for this standard apply to
power-operated swinging and sliding doors for pedestrian use and
some small vehicular traffic. Included are provisions intended
to reduce the chance of user injury or entrapment. Power-operated
doors primarily for…
This National Standard of Canada is equivalent to American
National Standards Institute standard ANSI/BHMA A156.13-1980. It
establishes requirements for Mortise Locks and Latches and
includes performance tests, security tests, operational tests,
finish tests and dimensional criteria.
This National Standard of Canada is equivalent to American
National Standard ANSI/BHMA A156.16-1981 in total, without any
modification. It establishes requirements for auxiliary hardware
and includes performance tests covering operational, cyclical,
strength and finish criteria.
This National Standard of Canada is equivalent to American
National Standard ANSI/BHMA A156.1-1981 in total, without any
modification. Cyclical, lateral and vertical wear tests
together with finish tests requiring salt spray exposures are a
part of this standard. Individual hinge types are described and
identified with code numbers. For full-mortise hinges, three
performance levels are…
This National Standard of Canada is equivalent to American National Standards
Institute standard ANSI/BHMA A156.5-1984.
1.1 This portion of ANSI/BHMA A156.5 establishes requirements for Auxiliary
Bored and Mortise Locks, Rim Locks, and Cylinders and includes security tests,
operational tests, finish tests, and dimensional criteria.
1.2 Tests described in this Standard are performed…
This National Standard of Canada is equivalent to American
National Standard ANSI/BHMA A156.7-1981. It covers the
requirements for the length, width, thickness, offset, and screw
hole spacing for builders template hinges. Included in the
standard are hinge identification symbols and screw sizes.
Methods for identifying template hinges that conform to the
Standard are provided.
This National Standard of Canada is equivalent to American National Standard
ANSI/BHMA A156.20-1984.
1.1 This Standard establishes requirements for Strap Hinges, Tee Hinges, and
Hasps and includes performance tests covering operational and strength
criteria.
1.2 Tests described in this Standard are performed under laboratory
conditions. In actual usage, results may vary because of…
Information Processing - SGML Support Facilities - Techniques for Using SGML
This National Standard of Canada is equivalent to ISO/IEC
Technical Report 9573.
1 Scope and Field of Application
This Technical Report complements ISO 8879 by providing additional tutorial information. It is not intended, and should not be regarded, as an extension, modification, or interpretation of ISO 8879. The SGML language contains a number of components, some of which are optional…
