Search

This National Standard of Canada is equivalent to American National Standards Institute (ANSI) standard ANSI T1.602-1989. It specifies the Link Access Procedure on the D-channel, LAPD. The purpose of LAPD is to convey information between layer-3 entities across the ISDn user-network interface using the D-channel. LAPD is a protocol operating at the data link layer of the OSI architecture…

This National Standard of Canada is equivalent to International Standard ISo 8831-1989. 1.1 Scope This International Standard is an application layer standard within the Open Systems Interconnection framework set up by ISO 7498. It defines the concepts and services for job transfer and manipulation. This International Standard requires that the user of JTm - specifies the open…

This National Standard of Canada is equivalent to International Standard ISo 8832-1989. 1.1 Scope This International Standard specifies the behaviour to be exhibited by an implementation claiming to conform to this International Standard. It specifies both dynamic conformance and static conformance. It can be referenced by other OSI Standards (using the notation defined in the JTm…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI/BHMA A156.11-1985. 1.1 This standard establishes requirements for Cabinet Locks used on doors, drawers and furniture. Cycle tests, operational tests, strength tests and finish tests are included. 1.2 Tests described in this Standard are performed under laboratory conditions. In…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI/BHMA A156.14-1985. 1.1 This Standard establishes requirements for Sliding and Folding Door Hardware. Cycle tests, static load, static friction, kinetic friction and finish tests are included. Hardware for light to very heavy doors is covered including both residential and industrial…

This National Standard of Canada is equivalent to International Standard ISO 4915-1981. It classifies, designates, describes and illustrates the various kinds of stitch types used in hand- and machine-sewn seams.

This National Standard of Canada is equivalent to International Standard ISO 4916-1982. 1 Scope and field of application This International Standard classifies, illustrates and designates the various kinds of stitched seams. It is not intended to be fully comprehensive but to illustrate a number of the most used seam types. It is applicable to seams used most particularly in the…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI/BHMA A156.12-1986. 1.1 This Standard establishes the requirements for Interconnected Locks and includes operational tests, security tests, cycle tests, finish tests and dimensional criteria. 1.2 Tests described in this Standard are performed under laboratory conditions. In actual…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI/BHMA A156.17-1987. It establishes requirements for Self Closing Hinges & Pivots. Cycle tests, operational tests, finish tests, and material and dimensional requirements are included.

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI/BHMA A156.18-1984. It establishes code numbers for finishes on various basis materials. It includes criteria for viewing comparative finishes in the field to determine whether they match and establishes five categories of finishes.