Search

This National Standard of Canada is equivalent to International standard ISo 6596/2:1985. This standard specifies the magnetic characteristics, the track layout, and a track format to be used on a 130 mm (5.25 in) flexible disk cartridge, recorded at 7 958 ftprad on one side using two-frequency recording at a track density of 1,9 tracks per millimetre (tpmm) [48 tracks per inch (tpi)],…

This National Standard of Canada is equivalent to International standard ISo 8378/1-1986. This standard specifies the dimensional, physical and magnetic characterisitics of the cartridge so as to provide physical interchangeability between data processing systems. Note - Numeric values in the SI and/or Imperial measurement system in this standard may have been rounded off and therefore…

This National Standard of Canada is equivalent to International standard ISo 8378/2:1986. This standard specifies the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5.25 in) flexible disk cartridges intended for data interchange between data processing systems. Note - Numeric values in the SI and/or Imperial measurement system in this standard…

This National Standard of Canada is based on International Standard IEC 1010-2-010:1992. 1. Scope and Object This clause of Part 1 is applicable except as follows: 1.1 Scope: This part 2 applies only to electrical powered laboratory equipment for the heating of materials, where the heating of materials is the only function or is one of several functions of the equipment. 1.1.2…

This National Standard of Canada is based on International Standard IEC 1010-2-020:1992. 1. Scope and Object This clause of Part 1 is applicable except as follows: 1.1 Scope This Particular Standard specifies requirements for the safety of electrically powered laboratory centrifuges designed to be installed and used in accordance with the Rules of the Canadian Electr ical Code,…

This National Standard of Canada is based on International Standard IEC 1010-2-031:1993. 1. Scope and Object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This Particular Standard specifies requirements for the safety of hand-held and hand-manipulated probe assemblies designed to be used with equipment installed and used in accordance with the Rules…

This National Standard of Canada is equivalent to International Standard ISO 9919:1992. 1.1 Scope ISO 9919 is one of a series of International Standards based on IEC 601-1; in IEC 601-1 (the General Standard), this type of International Standard is referred to as a Particular Standard. As stated in 1.3 of IEC 601-1:1988, the requirements of this International Standard take precedence…

This National Standard of Canada is equivalent to International Standard ISO 5007:1989. This Standard specifies a method for measuring and evaluating the effectiveness of the seat in reducing the vertical whole-body vibration transmitted to the operator of an agricultural tractor. Vibration which reaches the operator other than through his seat, for example that sensed by his feet on…

This National standard of Canada is equivalent to International Standard ISO 6011:1987. 1. Scope This Standard specifies the information to be obtained from the instruments on the instrument panel by the operator in his normal position. It also specifies the arrangement and colour distinction of this instrumentation in order to make it possible to operate the machine in a safe and…

This National standard of Canada is equivalent to International Standard ISO 7096:1982. 1. Scope This Standard specifies a method for the measurement, evaluation and acceptance level of the whole body vibration transmitted through the seat to the operator during laboratory simulated machine vertical vibration. 2. Field of application This Standard is applicable to seats fitted to…