Search

This National Standard of Canada is based on International Standard CEI/IEC 335-2-36:1993. 1. Scope This clause of part 1 is replaced by: This standard deals with the safety of electrically operated commercial cooking ranges, ovens, hobs, hob elements and similar appliances not intended for household use, their rated voltage being not more than 250 V for single phase appliances…

This National standard of Canada is equivalent to International standard ISO 8860/2:1987. This standard specifies the track layout, the track format and the characteristics of recorded signals. NOTE - Numeric values in the SI and/or imperial measurement system in this standard may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either…

This National standard of Canada is equivalent to International standard ISO 8860/1:1987. This standard specifies the dimensional, physical and magnetic characteristics of the cartridge, so as to provide physical interchangeability between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurements system in this standard may have been rounded off and therefore…

This National standard of Canada is equivalent to International standard ISO 8630/3:1987. This standard specifies the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5.25 in), 13 262 ftprad flexible disk cartridges intended for data interchange between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurement system in…

This National standard of Canada is equivalent to International standard ISO 8630/2:1987. This standard specifies the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5.25 in), 13 262 ftprad flexible disk cartridges intended for data interchange between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurement system in…

This Standard covers materials and methods of construction for cast-in-place concrete and concrete precast in the field. Notes: (1) Design of concrete structures is covered in CSA Standard A23.3, Design of Concrete Structures; CSA Standard S6, Design of Highway Bridges; or CSA Standard S29, Concrete Railway Bridges. Design of some specialty concrete products is covered in…

This National standard of Canada is equivalent to International standard ISO 7487/3:1986. This standard specifies the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5.25 in) flexible disk cartridges intended for data interchange between data processing systems. NOTE - Numeric values in the SI and/or Imperial measurement system in this standard…

This National Standard of Canada is based on International Standard ISO 7788-1995. 1 Scope and Field of Application This CSA Standard specifies delivery requirements which apply to the surface finish of hot-rolled plates and wide flats rolled on reversing mills, with nominal thicknesses equal to or less than 150 mm. For plates with a thickness greater than 150 mm and for special…

This National Standard of Canada is based on International Standard CEI/IEC 335-1:1976. 1. Scope 1.1 This standard applies to electric heating appliances and electric motor-operated or magnetically-driven appliances for household and similar purposes. This Standard applies to the safety of such equipment designed to be installed and used in…

This National Standard of Canada is based on International Standard CEI/IEC 335-2-15:1986. 1. Scope This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to electric water boilers, including kettles, having a rated capacity not exceeding 10 l, and to: - coffee-makers; - espresso coffee-makers…