Search

This National Standard of Canada is equivalent to International Standard IEC 384-1:1982 (second edition). 1. Scope This standard is applicable to fixed capacitors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications for Qualification Approval and for Quality Assessment Systems…

This National Standard of Canada is equivalent to International Standard CEI/IEC 384-14:1993 (second edition). 1. General 1.1 Scope This standard applies to fixed capacitors and resistor-capacitor combinations for electromagnetic interference suppression (formerly called radio interference suppression) for use within, or associated with, electronic or electrical apparatus and machines…

This National Standard of Canada is equivalent to International Standard CEI/IEC 384-14-1:1993 (first edition). Introduction Blank detail specification A blank detail specification is a supplementary document to the Sectional Specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 11185-10:1994. 1 Scope 1.1 General The concept of Profiles for OSI, and the structure of the International…

Specifies a uniform test method for braking systems of full trailers, semi-trailers and centre-axle trailers with compressed-air braking systems, pending the harmonization of national and international braking standards, regulations and directives. The brake test procedure specified herein applies to these trailers corresponding to vehicle category 0 in UN-ECE Regulation No. 13.

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 10737:1994. 1 Scope This International Standard provides the specification of management information within an Open System…

This National Standard of Canada is based on IEC 745-2-14:1984, and is joint with UL 745-2-14. 1. Scope This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to planers.

This National Standard of Canada is joint with UL 745-2-4 and based on IEC 745-2-4. 1. Scope This clause of Part 1 is applicable except as follows: 1.1 First sentence Replacement: This standard applies to hand-held electric motor-operated sanders. Sanders with water supply, random orbit sanders, and random orbit polishers are within the scope of this standard. Disc-type…

This National Standard of Canada is joint with UL 745-2-6 and is based on IEC 745-2-6. 1. Scope This clause of Part 1 is applicable, except as follows: 1.1 Replacement: This Standard applies to hammers.

This National Standard of Canada is joint with UL 745-2-8 and is based on IEC 745-2-8. 1. Scope This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to shears and nibblers.