1 Domaine d'application
1.1 Cette norme s'applique aux tubes électriques non métalliques ondulés (TEN),
ainsi qu'à leurs raccords fixés mécaniquement, destinés à être utilisés dans
des emplacements non dangereux conformément au Code canadien de l'électricité,
Première partie, et à la norme ANSI/NFPA 70, National Electrical Code (NEC).
Ces exigences visent également les…
1 Scope
1.1 This Standrd applies to corrugated electrical nonmetallic tubing (ENT) and
mechanically-attached fittings, for use in accordance with the Canadian
Electrical Code, Part I (CE Code, Part I), and the ANSI/NFPA 70 National
Electrical Code (NEC), in nonhazardous locations. These requirements also
apply to mechanically-attached fittings integral with an outlet box.
1.2 Products…
Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application
and interpretation of...
This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-1-1:1992
1 Scope
The object of this report is to desribe and interpret various terms considered
to be of basic importance to concepts and practical application in the design
and evaluation of electromagnetically compatible systems. In addition,
attention is drawn to the distinction between electromagnetic…
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environmen...
This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-2-1:1990.
1 Scope
This section of IEC 1000-2 is concerned with conducted disturbances in the
frequency range up to 10 kHz with an extension for mains signalling systems.
Separate sections give numerical compatibility levels for different system
voltage levels.
This section does not deal with the application…
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 2: Compatibility levels for low-...
This National Standard of Canada is based on International Standard CEI/IEC 1000-2-2:1990.
1 Scope
This section of IEC 1000-2 is concerned with conducted disturbances in the
frequency range up to 10 kHz with an extension for mains signalling systems.
This section gives numerical compatibility levels for low voltage a.c.
distribution systems with a nominal voltage up to 347 V, single-…
Dependability Management - Part 2: Dependability programme elements and tasks
This National Standard of Canada is equivalent to International Standard IEC 300-2:1995.
1 Scope
This Part of IEC 300 describes the elements of a dependability programme and
gives guidance on the selection of tasks necessary to achieve specified
dependability of products. This standard cross-references and complements ISO
9004-1. It is applicable to hardware and systems containing…
Dependability Management - Part 3: Application guide - Section 9: Risk analysis
of technological sys...
This National Standard of Canada is equivalent to International Standard IEC 300-3-9:1995.
1. Scope
This section of IEC 300-3 provides guidelines for selecting and implementing
risk analysis techniques, primarily for risk assessment of technological
systems. The objective of this standard is to ensure quality and consistency
in the planning and execution of risk analyses and the presentation…
Environmental management - Life cycle assessment - Principles and framework
This National Standard of Canada is equivalent to International Standard ISO 14040:1997.
1 Scope
This International Standard specifies the general framework, principles and
requirements for conducting and reporting life cycle assessment studies. This
International Standard does not describe the life cycle assessment technique in
detail.
Plugs and socket-outlets for domestic and similar general use standardized in member countries of IE...
The object of this technical report is to give general information about the systems of plugs and socket-outlets for household and similar purposes which are used in the IEC countries. The report only contains National Systems which are commonly used in homes and offices. It is therefore limited to systems for a.c. with a rated voltage above 50 V but not exceeding 440 V, intended for household…
Overhead lines - Meteorological data for assessing climatic loads
This Technical Report (type 2) aims at providing advice on methods for developing climatic load databases. This is necessary for the implementation of IEC 60826 which provides the framework for National Standards on overhead line design.