Scope
1.1.1 This Standard applies to ac and dc type portable fuel cell power systems, with a rated output voltage not exceeding 600 V, for commercial, industrial, and residential indoor and
outdoor use in non-hazardous locations, in accordance with the Rules of the National Electric Code, ANSI/NFPA 70.
1.1.2 This Standard does not apply to portable fuel cell power systems that are
a.…
Industrial-process control - Safety of analyser houses
describes the physical requirements for the safe operation of the process analyser measuring system installed in an AH in order to ensure its protection against fire, explosion and health hazards. This standard extends beyond IEC 60079-16 to include houses with Zone 2 interiors and to apply to toxic hazards. (Appropriate national guidelines on toxic hazards are to be followed.)
Live Working - Terminology for Tools, Equipment and Devices
This National Standard of Canada is equivalent to International Standard CEI/IEC 60743:2001, IDT.
1.1 Scope
This International Standard applies to the terminology used to describe tools, equipment,
devices and methods used in live working.
IEC 60050(651) gives the definitions of all terms used in live working. The present standard
permits identification of the tools, equipment and devices and…
Live Working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ±600 kV d.c.
This National Standard of Canada is equivalent to International Standard CEI/IEC 60895:2002, IDT.
1 Scope
This International Standard is applicable to conductive clothing, either assembled from
component parts or forming a single complete clothing, worn by (electrically) skilled persons
during live working (especially bare-hand working) at a nominal power system voltage up to
800 kV a.c…
This National Standard of Canada is equivalent to International Standard CEI/IEC 60903:2002, IDT.
1 Scope
This International Standard is applicable to:
- insulating gloves and mitts which should normally be used in conjunction with leather
protector gloves worn over the insulating gloves to provide mechanical protection;
- insulating gloves and mitts usable without over-gloves for mechanical…
This CSA Standard is a Tri-National standard, with NMX-J-548-ANCE-2004 and UL 486C.
1 Scope
1.1 This Standard applies to hand- or tool-applied splicing wire and cable connectors intended for use with all alloys of copper or aluminum conductors, or both, in accordance with the Canadian Electrical Code Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in the United States of…
Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in Organizations
This national Standard of Canada is equivalent to international Standard ISO 10002:2004.
1 Scope
This International Standard provides guidance on the process of complaints handling related to products within an organization, including planning, design, operation, maintenance and improvement. The complaints handling process described is suitable for use as one of the processes of an overall…
Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspe...
ISO 10464:2004 specifies the intervals and inspection and testing procedures for the periodic inspection of refillable welded steel dedicated LPG cylinders of water capacity from 0,5 l up to and including 150 l.
It applies to cylinders protected by a system to prevent external corrosion and designed and manufactured in accordance with ISO 4706, ISO 22991 or an equivalent design and construction…
Fiches, prises et connecteurs de câble à contacts cylindriques
1 Domaine d?application
1.1
Cette norme s?applique aux fiches, aux prises, aux entrées d?alimentation et aux connecteurs à contacts
cylindriques dont les caractéristiques nominales sont d?au plus 800 A et d?au plus 600 V c.a. ou c.c., et qui
peuvent comporter un maximum de deux contacts auxiliaires. Ces dispositifs sont destinés à transmettre le
courant à partir de circuits de dérivation, ou à…
Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess fi...
This National Standard of Canada is equivalent to International Standard ISO 23328-1:2003, first edition.
1 Scope
This part of ISO 23328 gives a short-term airborne sodium chloride particle challenge test method for
assessing the filtration performance of breathing system filters (BSF) intended for the filtration of respired
gases.
This part of ISO 23328 is applicable to BSF used with a…