Search

This National Standard of Canada is equivalent to International Standard CEI/IEC 1029-2-9:1995 first edition, 1995-04. 1 Scope This clause of part 1 is applicable except as follows: 1.1 Modification Replace the first paragraph by: This International Standard applies to transportable mitre saws intended for cutting non ferrous metals such as aluminum, wood and similar materials with…

This National Standard of Canada is equivalent to International Standard IEC 61029-2-10:1998, first edition, 1998-06. 1 Scope This clause of part 1 is applicable, except as follows: 1.1 Addition: This standard applies to cutting-off grinders intended mainly for cutting metal with a plain abrasive cutting-off wheel whose diameter does not exceed 406 mm and has a rated peripheral speed not…

This National Standard of Canada is equivalent to International Standard ISO 14064-1:2006, first edition, 2006-03-01. 1 Scope This part of ISO 14064 specifies principles and requirements at the organization level for quantification and reporting of greehouse gas (GHG) emissions and removals. It includes requirements for the design, development, management, reporting and verification of…

This National Standard of Canada is equivalent to International Standard ISO 14064-2:2006, first edition, 2006-03-01. 1 Scope This part of ISO 14064 specifies principles and requirements and provides guidance at the project level for quantification, monitoring and reporting of activities intended to cause greenhouse gas (GHG) emission reductions or removal enhancements. It includes…

This National Standard of Canada is equvalent to International Standard ISO 14064-3:2006, first edition, 2006-03-01. 1 Scope This part of ISO 14064 specifies principles and requirements and provides guidance for those conducting or managing the validation and/or verification of greenhouse gas (GHG) assertions. It can be applied to organizational or GHG project quantification, including GHG…

1. SCOPE 1.1 The Standards for foam liquid concentrates are divided into three categories. Category 1 Category 2 Category 3 Primarily for use on general-purpose hydrocarbon fires Primarily for use on polar solvents, oxygenated fuels, and water-miscible fuels and all Category 1 applications Primarily for use on aircraft rescue fire fighting and all Category 1 applications This Standard refers to…

ISO 23273-1:2006 specifies the essential requirements for the functional safety of fuel cell (FCV) with respect to hazards to persons and the environment inside and outside of the vehicles caused by the operational characteristics of the fuel cell power system. It does not apply to manufacturing, maintenance or repair of the vehicles. The requirements in ISO 23273-1:2006 address both normal…

Specifies the minimum operational and performance requirements, methods of testing and required test results for Class B shipborne AIS equipment using CSTDMA techniques. Takes into account other associated IEC International Standards and existing national standards. Is applicable for AIS equipment used on craft that are not covered by the mandatory carriage requirement of AIS under SOLAS Chapter…

ISO 22718:2006 gives general guidelines for the detection and identification of the specified micro-organism Staphylococcus aureus in cosmetic products. Micro-organisms considered as specified in this International Standard might differ from country to country according to national practices or regulations. In order to ensure product quality and safety for consumers, it is advisable to perform an…

This CSA Standard is a joint Standard with UL 224. 1 Scope 1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or thermoplastic polymers (see Table 1 for materials and ratings). These requirements also cover heat-shrinkable…