Enclosures for Electrical Equipment, Non-Environmental Considerations
1 Scope
1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows:
a) Enclosures for indoor locations, Types 1, 2,…
Enclosures for Electrical Equipment, Environmental Considerations
1 Scope
1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico's Electrical Installations, NOM-001-SEDE, as follows:
a) Enclosures for indoor locations, Types 1, 2, 5,…
1 Scope
1.1 This Standard applies to grounding and bonding equipment for use in accordance with the Canadian Electrical Code, Part I, CSA C22.1, in Canada or the National Electrical Code, NFPA 70, in the United States.
1.2 This Standard applies to the following grounding and bonding equipment:
(a) ground clamps, bonding devices, grounding bushings, water-meter shunts, grounding electrodes, and…
Software and systems engineering — Life cycle management — Guidelines for process description
An increasing number of international, national and industry standards describe process models. These models are developed for a range of purposes including process implementation and assessment. The terms and descriptions used in such models vary in format, content and level of prescription. ISO/IEC TR 24774:2007 presents guidelines for the elements used most frequently in describing a process:…
Software and systems engineering - Life cycle management - Guidelines for process description
An increasing number of international, national and industry standards describe process models. These models are developed for a range of purposes including process implementation and assessment. The terms and descriptions used in such models vary in format, content and level of prescription. ISO/IEC TR 24774:2007 presents guidelines for the elements used most frequently in describing a process:…
Cosmetics — Microbiology — Detection of specified and non-specified microorganisms
ISO 18415:2007 gives general guidelines for the detection and identification of specified microorganisms in cosmetic products as well as for the detection and identification of other kinds of aerobic mesophilic non-specified microorganisms in cosmetic products.
Microorganisms considered as specified in this International Standard might differ from country to country according to national…
Microbiology of food and animal feeding stuffs — General requirements and guidance for microbiologic...
ISO 7218:2007 gives general requirements and guidance/options intended for three main uses:
implementation of ISO TC34/SC9 or TC34/SC5 standards for detection or enumeration of microorganisms;good laboratory practices for food microbiological laboratories (the purpose is not to detail them in this International Standard, manuals are available for that purpose);guidance for accreditation of food…
Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type
1 Scope
1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include two or fewer pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I (CEC), C22.1,…
STANDARD METHOD OF FIRE TEST OF
LIGHT DIFFUSERS AND LENSES
1. SCOPE
1.1 This test method is applicable to materials employed in light diffusers and lenses.
1.2 The testing procedure described herein is intended to assess the propensity of
material employed in light diffusers and lenses to fall from its installed position before igniting
when subjected to test fire exposure conditions in CAN/ULC-S102, as required in the National
Building Code of…
Ferrite cores - Dimensions - Part 1: General specification
IEC 62317-1:2007 specifies the standards and existing projects dealing with dimensions of ferrite cores. It is intended that this standard will include ferrite cores which are widely used and referenced in industry, either because they are included in national standards, or because they are seen to have broad-based use in industry. Where applicable, it is intended that the existing industrial…