Search

1.1 Scope 1.1.1 This standard applies to newly produced vented gas-fired space heating appliances (see Part XII, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials, and having input ratings up to and including 400,000 Btu/hr (117 228 W). These appliances are: a. For use with natural gas; b. For use with manufactured gas; c. For use…

1.1 This Standard sets forth the minimum requirements for the adaptation of tank assemblies constructed in accordance with the requirements described in Clause 3.1 for the collection, storage and removal of used oil. 1.2 Used oil tank assemblies covered by this Standard are intended for stationary installation and use in accordance with, but not limited to the following: A National Fire Code of…

1. SCOPE 1.1 This Standard sets forth minimum requirements for primary carrier, secondary containment, integral primary/secondary, normal vent and vapour recovery, nonmetallic pipe, fittings, and systems (products) intended for use underground for the distribution of petroleumbase flammable and combustible liquids, alcohols, and alcohol-blended fuels as identified in this document. 1.2…

ISO 9707:2008 gives guidance on the keeping of national statistics to provide standardized information on various aspects of the production and distribution of printed, electronic and micro-publications (essentially books, newspapers and periodicals). In addition, ISO 9707:2008 provides recommendations on subject classification. ISO 9707:2008 is not applicable to the following types of…

ISO 15614-3:2008 specifies how a preliminary welding procedure specification (pWPS) for production and repair welding of non-alloyed and low-alloyed cast irons is qualified by fusion welding procedure tests. ISO 15614-3:2008 defines the conditions for execution of the welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the…

This National Standard of Canada is based on International Standard IEC 61400-1:2007. 1 Scope This part of IEC 61400 specifies essential design requirements to ensure the engineering integrity of wind turbines. Its purpose is to provide an appropriate level of protection against damage from all hazards during the planned lifetime. This standard is concerned with all subsystems of wind turbines…

This National Standard of Canada is based on International Standard ISO 8637:2004. 1 Scope This International Standard specifies requirements for haemodialysers, haemodiafilters, haemofilters and haemoconcentrators, hereinafter collectively referred to as "the device", for use for humans. This lnternational Standard is not applicable to - extracorporeal blood circuits, -…

This National Standard of Canada is based on International Standard ISO 8638:2004. 1 Scope This International Standard specifies requirements for single-use extracorporeal blood circuits (hereafter referred to as "the device") and (integral and non-integral) transducer protectors which are intended for use in haemodialysis, haemodiafiltration and haemofiltration. This International…

1.1 Scope 1.1.1 This standard applies to newly produced, gas-fired low-intensity infrared heaters and infrared radiant tube heaters (see Part IV, Definitions), hereinafter referred to as heaters or appliances, constructed entirely of new, unused parts and materials with inputs up to and including 400 000 Btu/hr (117.23 kW) per burner: a. For use with natural gas; b. For use with…

1.1 Scope 1.1.1 This standard applies to newly produced, direct gas-fired process air heaters of the recirculating or non-recirculating type, (See Definition), hereinafter referred to as heaters, whose primary purpose is to provide process heating to non-occupied spaces within commercial and industrial buildings and may also include operation as a non-recirculating ventilation air heater, (See…