Air-, cable-, and frame-supported membrane structures
1 Scope
1.1
This Standard provides requirements for the design, fabrication, installation, and maintenance of single-membrane structures that are either reinforced or unreinforced and that are air-supported, frame-supported, or cable-supported.
1.2
The general requirements, structural design methods, loadings, and limit states specified in this Standard are intended to be consistent with the…
This Standard covers factory-built grease ducts and grease duct assemblies that are intended to be installed
as alternatives to the grease ducts constructed of all welded 1.37 mm carbon steel or 1.09 mm stainless steel
required by ULC-S650, Standard for the Installation and Performance of Ventilation and Fire Suppression
Systems for Commercial and Institutional Cooking Equipment.
Grease…
Les présentes exigences portent sur les conduits de graisse et les ensembles conduit de graisse préfabriqués
pouvant être installés à la place des conduits de graisse en acier au carbone de 1,37 mm entièrement soudé
ou en acier inoxydable de 1,09 mm, requis en vertu de la norme ULC-S650, Standard for the Installation and
Performance of Ventilation and Fire Suppression Systems for Commercial…
Scope
1.1
This Code applies to the installation of appliances, equipment, components, and accessories where oil is used for fuel purposes in applications that include
(a) space heating;
(b) service water heating;
(c) power generation; and
(d) process application.
1.2
This Code provides minimum requirements for installing or altering all stationary and portable oil-burning equipment, including
(…
1 Scope
1.1 These requirements are intended to cover both self-ballasted lamps and self-ballasted lamp adapters
rated 120 to 347 V AC nominal for connection to screw-, pin-base, and recessed single contact (RSC or
R7) lampholders. These devices are intended for use in accordance with the National Electrical Code,
ANSI/NFPA 70, and the Canadian Electrical Code, Part I, in non-hazardous locations…
Cereals — Determination of bulk density, called mass per hectolitre — Part 2: Method of traceability...
ISO 7971-2:2009 specifies a test method for ensuring the traceability of mass per hectolitre measuring instruments through reference to standard measurement instruments. The mass per hectolitre or bulk density is of commercial importance for grain cereals. Several types of instruments with varying performances exist for measuring it.
ISO 7971-2:2009 also specifies the performances required of…
Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation
IEC 60800:2009 is applicable to, and specifies requirements for, resistive heating cables for low temperature applications such as comfort heating and the prevention of ice formation. These cables and cable sets may comprise either factory fabricated or field (work-site) assembled units, and which are heating cables assembled in accordance with manufacturer's instructions. Bare conductors…
LIVE WORKING – CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 kV A.C. AND ± 600 kV D.C.
This National Standard of Canada is based on International Standard CEI/IEC 60895:2002.
This National Standard of Canada is applicable to conductive clothing, either assembled from component parts or forming a single complete clothing, worn by (electrically) skilled persons during live working (especially
bare-hand working) at a nominal power system voltage up to 800 kV a.c. and ± 600 kV d.c…
Live working -- Voltage Detectors -- Part 2: Resistive Type to be Used for Voltages Exceeding 1 kV t...
This National Standard of Canada is based on International Standard CEI/IEC 61243-2.
This part of CAN/ULC-61243 is applicable to portable voltage detectors with or without a built-in power source to be used on electrical systems for voltages of 1 kV to 36 kV a.c., and frequencies from 15 Hz to 60 Hz.
This part applies only to resistive voltage detectors used in contact with the part to be…
Live Working - Guidelines for the Installation of Transmission Line Conductors and Earthwires - Stri...
This National Standard of Canada is based on International Standard CEI/IEC 61328:2003.
This National Standard of Canada provides recommendations for the selection and testing where necessary of conductor stringing equipment and accessory items used for the installation of overhead conductors and overhead earthwires…