Search

This National Standard of Canada is based on CEI/IEC 60335-2-9:2002 + A1:2004. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric portable appliances for household purposes that have a cooking function such as baking, roasting and grilling, their rated voltage being not more than 250 V. NOTE 101 Examples of appliances that…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-4:2002. 1 Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies requirements for the safety of CARDIAC DEFIBRILLATORS as defined in 2.1.101, hereinafter referred to as EQUIPMENT. This Particular Standard does not apply to…

This National Standard of Canada is equivalent to International Standard IEC 60601-1-2:2001 (second edition, 2001-09). 1 Scope and object 1.201 Scope This standard applies to ELECTROMAGNETIC COMPATIBILITY of MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS, hereinafter referred to as EQUIPMENT and SYSTEMS, respectively. 1.202 Object This standard specifies requirements and tests for…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-17:04, second edition. 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: 1.1.101 This Particular Standard specifies requirements for the safety of automaticallycontrolled EQUIPMENT for BRACHYTHERAPY of patients using AFTERLOADING techniques. 1.1.102 This…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-5:2000. 1.1 Scope Addition: This Particular Standard specifies the requirements for safety of ULTRASONIC PHYSIOTHERAPY EQUIPMENT used in medical practice, as defined in 2.1.101. This Particular Standard does not apply to: - EQUIPMENT in which a tool is driven by ULTRASOUND (for example EQUIPMENT…

SCOPE This standard applies to backwater valves designed to be used in drainage systems (see note) and to check valves designed to be used in drainage systems that do not drain by gravity to the building sewer, in compliance with the requirements of the National Plumbing Code of Canada - 2005. NOTE - The National Plumbing Code of Canada - 2005 defines the term drainage system as follows: "…

This CSA Standard is joint with both UL 486D and NMX-J-519-ANCE-05. 1 Scope 1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for wet or damp locations, and other installations such as direct burial, below grade, or above…

1.1 Scope 1.1.1This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a.For use with natural gas; b.For use with liquified petroleum (propane); c.Direct vent appliances for manufactured home (USA only) or mobile home OEM installation convertible…

This National Standard of Canada is equivalent to International Standard ISO 9000:2005. 1 Scope This International Standard describes fundamentals of quality management systems, which form the subject of the ISO 9000 family, and defines related terms. This International Standard is applicable to the following: a) organizations seeking advantage through the implementation of a quality…

This National Standard of Canada is joint with UL 60745-2-19. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to jointers for cutting into wood or similar material.