Search

This National Standard of Canada is based on ANSI/WCMA A100.1-2002. 1. SCOPE & FOREWORD 1.1 The members of the Window Covering Manufacturers Association, Inc. (WCMA), recognizing that unfortunate accidents, including strangulation, have occurred among young children using certain products having flexible loops made or imported by members of the industry, have prepared this Standard in…

This National Standard of Canada is based on International Standard ISO 8835-4:2004. 1 Scope IEC 60601-1:1988, Clause 1 applies except as follows. Addition: This part of ISO 8835 specifies particular requirements for the essential performance of anaesthetic vapour delivery devices (AVDDs), as defined in 3.1. This part of ISO 8835 is applicable to AVDDs which are a component of an anaesthetic…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-13:2002 +A1 :2004 edition 5.1, 2004-07. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric deep fat fryers, frying pans and other appliances in which oil is used for cooking, and intended for household use only, their rated voltage being not…

This National Standard of Canada is based on International Standard CEI/IEC 60335-2-2:2002 +A1 :2004. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric vacuum cleaners and watersuction cleaning appliances for household and similar purposes, including vacuum cleaners for animal grooming, their rated voltage being not…

This National Standard of Canada is based on International Standard CEI/IEC 61000-3-11:2000. 1 Scope and object This part of IEC 61000 is concerned with the emission of voltage changes, voltage fluctuations and flicker produced by equipment and impressed on the public low-voltage supply system. It specifies the limits of voltage changes produced by equipment tested under specified…

This National Standard of Canada is based on International Standard ISO 8835-5:2004. 1 Scope IEC 60601-1:1988, Clause 1 applies except as follows: This part of ISO 8835 specifies particular requirements for the essential performance of anaesthetic ventilators (as defined in 3.1). This part of ISO 8835 is applicable to anaesthetic ventilators which are always a component of an anaesthetic…

1 Scope 1.1 This Standard applies to Class A, single- and three-phase, ground-fault circuit-interrupters intended for protection of personnel, for use only in grounded neutral systems in accordance with the National Electrical Code (NEC), ANSI/NFPA 70, the Canadian Electrical Code, C22.1(CEC), and Electrical Installations(Use), NOM-001-SEDE. These devices are intended for use on alternating…

This National Standard of Canada is based on International Standard ISO 14161:2000. 1 Scope This International Standard provides guidance for the selection, use and interpretation of results from application of biological indicators when used in the development, validation and routine monitoring of sterilization processes. This International Standard applies to biological indicators for…

This National Standard of Canada is equivalent to International Standard ISO 14341:2002. 1 Scope This International Standard specifies requirements for classification of wire electrodes in the as-welded condition and in the post weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm2 or a minimum…

Cette norme CSA est commune avec UL 486D et NMX-J-519-ANCE-05. 1 Domaine d'application 1.1 Cette norme vise les connecteurs de fils scellés, y compris les capuchons isolants, les couvercles, les résines, les tubes et les rubans isolants qui équipent les connecteurs de fils ou pour utilisation avec ces derniers. Ces connecteurs sont conçus pour utilisation dans les emplacements mouillés ou…