Search

Scope 1.1 Organization and content This National Standard of Canada sets out requirements for the design, manufacture, maintenance, qualification, selection and use of ton containers used in the handling, offering for transport or transport of dangerous goods of Classes 2, 3, 4, 5, 6.1, 8 and 9. This standard does not apply to large means of containment that are used exclusively for non-…

1 Scope 1.1 These requirements cover complete, self-contained strainer or filter assemblies intended for use with designated flammable and combustible liquids, anhydrous ammonia (fertilizer grade), and non-potable water. Flammable and combustible liquid strainers or filter assemblies are used in residential and commercial fuel-burning, dispensing, and handling facilities. Although these…

1 Domaine d’application 1.1 Ces exigences couvrent les ensembles complets de crépines ou de filtres autonomes destinés à être utilisés avec des liquides inflammables et combustibles désignés, de l’ammoniac anhydre (qualité engrais) et de l’eau non potable. Les ensembles crépines ou filtres pour liquides inflammables et combustibles sont utilisés dans les installations résidentielles et…

This National Standard of Canada applies to the design, colour, materials, construction and performance requirements of the National Flag of Canada intended for outdoor use. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its…

This National Standard of Canada applies to the design, colour, materials, construction and performance requirements of the National Flag of Canada intended for indoor use. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its…

This National Standard of Canada applies to the design, colours, and performance of the National flag of Canada intended for one-event-only use. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its use. Anyone using this…

This document describes the consensus standardization process established by the Bureau de normalisation du Québec (BNQ) to meet the accreditation requirements of the standards development organizations of the Standards Council of Canada (SCC). This process is based on the requirements and guidelines set out in the document Canadian Standards Development — Requirements & Guidance —…

Scope This National Standard of Canada assesses the combustion resistance of mattresses when in contact with a lighted cigarette. This standard covers the resistance of mattresses to ignition only by a burning cigarette and does not relate to their resistance to any other source of ignition or fire conditions. The testing and evaluation of a product against this standard may require the use of…

Scope This National Standard of Canada determines the flame spread properties of a textile product when a specimen is supported at an angle of 45° and a flame is applied to its surface for 1 s. It also describes the dry cleaning and laundering procedures for removing non-permanent flame-retardant treatments applied to textile products. The testing and evaluation of a product against this method…

1 Scope This document gives the safety requirements and measures for stationary and displaceable combined woodworking machines, having at least two separately usable working units and with manual loading and unloading of the workpiece, hereinafter referred to as “machines”. The integrated working units can be of these types only: — a sawing unit; — a moulding unit; — a planing unit. The…