Search

This National Standard of Canada is based on International Standard CEI/IEC 60895:2002. This National Standard of Canada is applicable to conductive clothing, either assembled from component parts or forming a single complete clothing, worn by (electrically) skilled persons during live working (especially bare-hand working) at a nominal power system voltage up to 800 kV a.c. and ± 600 kV d.c…

This National Standard of Canada is based on International Standard CEI/IEC 61243-2. This part of CAN/ULC-61243 is applicable to portable voltage detectors with or without a built-in power source to be used on electrical systems for voltages of 1 kV to 36 kV a.c., and frequencies from 15 Hz to 60 Hz. This part applies only to resistive voltage detectors used in contact with the part to be…

This National Standard of Canada is based on International Standard CEI/IEC 61328:2003. This National Standard of Canada provides recommendations for the selection and testing where necessary of conductor stringing equipment and accessory items used for the installation of overhead conductors and overhead earthwires…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-020:2006. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope Replacement: This Part 2 is applicable to electrically powered LABORATORY CENTRIFUGES. NOTE If all or part of the equipment falls within the scope of one or more other Part 2 standards of IEC 61010 as well as…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-6:2003. 1 Scope and object This part of IEC 61000-4 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 9 kHz up to 80 MHz. Equipment not having at least one…

This National Standard of Canada is equivalent to International Standard IEC/TR 61000-3-13:2008. 1 Scope This part of IEC 61000 provides guidance on principles which can be used as the basis for determining the requirements for the connection of unbalanced installations (i.e. three-phase installations causing voltage unbalance) to MV, HV and EHV public power systems (LV installations are covered…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-6-1:2005. 1 Scope and object This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in residential, commercial and light-industrial environments. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be…

This National Standard of Canada is equivalent to International Standard CEI/IECCISPR 13:2001. 1 Scope and object This International Standard applies to the generation of electromagnetic energy from sound and television receivers for the reception of broadcast and similar transmissions and from associated equipment. The frequency range covered extends from 9 kHz to 400 GHz. No…

A23.1-09 Concrete materials and methods of concrete construction Scope 1.1 General This Standard provides the requirements for materials and methods of construction for (a) cast-in-place concrete and concrete precast in the field; and (b) residential concrete used in the construction of buildings conforming to Part 9 of the National Building Code of Canada (NBCC). 1.2 This Standard does not…

Scope 1.1 This Standard specifies the requirements for low-halogen aboveground (Type AG) reinforced thermosetting resin conduit (RTRC) and fittings for installation and use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I, and NFPA 70, National Electrical Code (NEC), in non-hazardous locations. 1.2 The products specified in this Standard are intended for use at -40°C (-…