Search

This National Standard of Canada is equivalent to International Standard ISO 105-B01:1994. 1 Scope This part of ISO 105 specifies a method intended for determining the resistance of the colour of textiles of all kinds and in all forms to the action of daylight. This method allows the use of two different sets of blue wool references. The result from the two different sets of references may not…

This National Standard of Canada is based on International Standard ISO 811:1981. This International Standard specifies a hydrostatic pressure method for determining the resistance of fabrics to penetration by water. The method is primarily intended for dense fabrics, e.g. ducks, tarpaulins and tentings.

This National Standard of Canada is based on International Standard ISO 6941:2003. 1 Scope This International Standard specifies a method for the measurement of flame spread times of vertically oriented textile fabrics and industrial products in the form of single or multi-component fabrics (coated, quilted, multilayered, sandwich combinations, and similar combinations) when subjected to a…

This National Standard of Canada is based on International Standard ISO 6940:2004. 1 Scope This International Standard specifies a method for the measurement of ease of ignition of vertically oriented textile fabrics and industrial products in the form of single or multi-component fabrics (coated, quilted, multilayered, sandwich constructions, and similar combinations), when subjected to a…

Preface This is the second edition of CSA 056, Round wood piles. It supersedes the previous edition published in 1962 and replaces CSA O56-M79, Round wood piles. The major changes in this edition include the following: (a) The 1962 imperial and 1979 metric editions of the Standard have been consolidated, and metric dimensions have been further refined to accommodate established imperial…

1 Scope 1.1 The requirements of this Standard apply to manually operated, general-use snap switches for connection to copper (Cu) or copper-clad conductors used in accordance with the National Electrical Code(NEC), ANSI/NFPA 70, or the Canadian Electrical Code (CEC), Part I, and intended for connection to wiring systems recognized by the NEC or the CEC, Part I. In Canada, requirements for…

Scope 1.1 General This standard specifies the requirements for flexible cords, elevator cables, and hoistway cables rated 600 V maximum and intended for use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I and CAN/CSA-C22.2 No. 0, General Requirements / Canadian Electrical Code, Part II, in Canada, NOM-001-SEDE, La Norma de Instalaciones Electricas (Mexican Electrical Code […

1 PURPOSE AND SCOPE This document describe the policy and the rules of procedure used by the Bureau de normalisation du Québec (BNQ) in the development, revision, modification, reaffirmation and withdrawal of consensual documents, including national standards of Canada. NOTE — This policy and these rules of procedure conform to the principles specified in the current edition of Documents CAN-P-…

This National Standard of Canada is equivalent to International Standard ISO 15077:2008. 1 Scope This International Standard specifies the preferred method of operation and requirements related to operator controls actuated by hand and foot, installed in agricultural tractors and self-propelled agricultural machinery and used by a seated operator as intended and under the conditions…

This National Standard of Canada is based on International Standard ISO 17510-1:2007. 1 * Scope IEC 60601-1:1988, Clause 1 applies, except as follows. Amendment (add at the end of the Subclause 1.1): This part of ISO 17510 specifies requirements for equipment intended for sleep apnoea breathing therapy for domiciliary use, ships, aircraft and other transport vehicles and for use in…