Search

This is the fourth edition of CAN/CSA-Z8836, Suction catheters for use in the respiratory tract, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 8836 (fourth edition, 2014-10-15). It supersedes the previous edition published in 2011 as CAN/CSA-Z8836 (adopted ISO 8836:2007). For brevity, this Standard will…

This is the first edition of CAN/CSA-Z17510, Medical devices — Sleep apnoea breathing therapy — Masks and application accessories, which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 17510 (first edition, 2015-08-01). It replaces CAN/CSA-Z17510-2-10 (adopted ISO 17510-2:2007). For brevity, this Standard will be…

1.1 This Part applies to fuses for photovoltaic (PV) systems rated up to 1500 Vdc. 1.2 Fuses for photovoltaic (PV) systems are intended to be used for the protection of photovoltaic strings or arrays and their associated wiring to provide protection against overloads or short circuits within the marked electrical ratings in accordance with the Canadian Electrical Code (CSA C22.1 Canadian…

1.1 This National Standard of Canada1 provides additional information to CAN/CGSB-32.310, Organic production systems — General principles and management standards, in the form of permitted substances to be used as annotated in accordance with the scope of the table in which they are listed. Use of a listed substance in a manner inconsistent with the scope of the table in which it appears is…

1.1 These requirements apply to Factory-Built Unvented Decorative Appliances that are intended to be fixed/non-movable and that use ethyl alcohol (ethanol) and isopropyl alcohol (isopropanol) in liquid or gel form as the fuel. These appliances are intended to be decorative in nature and limited to a maximum output of 3 kW (10,000 BTU/hour). Appliances that use fuel oils, kerosene, gasoline,…

1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico’s Electrical Installations, NOM-001-SEDE, as follows: a) Enclosures for indoor locations, Types 1, 2, 5, 12, 12K,…

1.1 General This Standard provides the requirements for materials and methods of construction for (a) cast-in-place concrete and concrete precast in the field; and (b) residential concrete used in the construction of buildings conforming to Part 9 of the National Building Code of Canada (NBCC). 1.2 This Standard does not specify the following: (a) requirements for the design of concrete…

1.1 This Standard applies to all types of laboratory fume hoods, except for ductless fume hoods. Note: Ductless fume hoods should not be considered acceptable substitutes for ducted fume hoods. Some jurisdictions prohibit use of ductless fume hoods with certain chemicals. For these reasons, ductless fume hoods have not been included in this Standard. 1.2 This Standard specifies a) safety…

1.1 [Add the following paragraph] This Standard applies to the safety of such equipment designed and constructed for installation and use in accordance with CSA C22.1, Canadian Electrical Code (CE Code), Part I. 1.5 Normative references [Add the following] Any reference to International Standards that are adopted as National Standards of Canada subsequent to the publication of CAN/CSA-E60730-2-9…

1.1 This Standard shall apply to egress door securing and releasing devices to perform the function of holding a door in the closed position and releasing the door to permit free egress when operated. Egress door securing and releasing devices are considered ancillary devices and are not an integral part of the fire alarm system. 1.2 This Standard covers physical and performance requirements…