Search

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-2-4:2002 (second edition, 2002-06). 1 Scope This part of IEC 61000 is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz. It gives numerical compatibility levels for industrial and non-public power distribution systems at nominal voltages up to 35 kV and a nominal frequency of 50…

This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-2-6:1995 (first edition, 1995-09). 1 Scope This technical report recommends the procedures to assess the disturbance levels produced by the emission of the devices, equipment and systems installed in non-public networks in industrial environment as far as the low-frequency conducted disturbances in the power…

This National Standard of Canada is equivalent to International Standard ISO 15882:2003 (first edition, 2003-03-15). 1 Scope This International Standard provides guidance for the selection, use and interpretation of results of chemical indicators used in process definition, validation, and routine monitoring and control of sterilization processes. This International Standard is…

This National Standard of Canada is equivalent to International Standard ISO/IEC 7816-8:1999. 1 Scope This part of ISO/IEC 7816 specifies: - security protocols for use in cards; - secure messaging extensions; - the mapping of the security mechanisms on to the card(s) security functions/services, including a description of the in-card security mechanisms; - data elements for…

This is a Tri-national standard with ANCE NMX-J-023/1 and UL 514A. 1 Scope 1.1 This standard applies to metallic OUTLET BOXES, flush-DEVICE BOXES, FLOOR BOXES, CONCRETE BOXES, EXTENSION RINGS, covers, CONDUIT BODIES, BAR HANGERS, bar-hanger assemblies, and all accessories whose principal function is for support of boxes. The products covered by this standard are intended for installation in…

This is a Tri-national standard with ANCE NMX-J-017 and UL 514B. 1 Scope 1.1 These requirements cover FITTINGS for use with cable and conduit intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code (CEC), Part I, CSA C22.1, and the Standard for Electrical Installations, NOM-001-SEDE. 1.2 These requirements cover CONDUIT LOCKNUTS,…

This National Standard of Canada is based on International Standard CEI/IEC 1000-3-6:1996 (first edition, 1996-10). 1 Scope This technical report outlines principles which are intended to be used as the basis for determining the requirements for connecting large distorting loads (producing harmonics and/or interharmonics) to public power systems. The primary objective is to provide guidance…

This National Standard of Canada is based on International Standard CEI/IEC 1000-3-7:1996 (first edition, 1996-10). 1 Scope This technical report outlines principles which are intended to be used as the basis for determining the requirements for connecting large fluctuating loads (producing flicker) to public power systems. The primary objective is to provide guidance for engineering…

1.1 Scope 1.1.1 This standard applies to newly produced vented gas-fired space heating appliances (see PartXIV, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials, and having input ratings up to and including 400,000 Btu per hour. These appliances are: a. For use with natural gas; b. For use with manufactured gas; c. For use…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISO/IEC 14776-331:2002 (first edition, 2002-09). 1 Scope This part of ISO/IEC 14776 defines the command set extensions to facilitate operation of SCSI stream devices. This standard in conjunction with ANSI INCITS 351-2001 fully specifies the standard command set for the SCSI stream device class. The objective of…