Search

Cette norme est commune avec ANCE NMX-J-023/1 et UL 514A. 1 Domaine d'application 1.1 Cette norme vise les boîtes de sortie métalliques, les boîtes pour appareil affleurantes, les boîtes de plancher, les boîtes pour béton, les cadres de prolongement, les couvercles, les entrées de conduit, les barres de suspension et leurs montages, ainsi que tous les accessoires dont la fonction…

Scope 1.1.1 This standard applies to newly produced automatic valves (see Part VI, Definitions) constructed entirely of new, unused parts and materials. These valves may be individual automatic valves or valves utilized as parts of automatic gas ignition systems. This standard also applies to commercial/industrial safety shutoff valves (see Part VI, Definitions), herein after referred to as C…

Scope 1.1.1 This standard applies to newly produced type 2 clothes dryers (see Part IV, Definitions) hereinafter referred to as dryers, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with manufactured gas; c. For use with mixed gas; d. For use with propane gas; e. For use with liquefied petroleum gases; and f. For use with LP gas-air mixtures.…

1.1 Scope 1.1.1 This standard applies to newly produced pilot gas filters, hereinafter referred to as filters (See Part IV, Definitions), constructed entirely of new, unused parts and materials. Compliance of a filter with this standard does not imply that the filter is acceptable for use on gas appliances without supplemental tests with the filter applied to the particular appliance…

This National Standard of Canada is equivalent to International Standard ISO 13937-1:2000. 1. Scope This part of EN ISO 13937 describes a method known as the ballistic pendulum (Elmendorf) method for the determination of tear force of textile fabrics. The method describes the measurement of the tear force required to propagate a single-rip tear of defined length from a cut in a fabric when…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-11:2004. 1 Scope This part of IEC 61000 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. This standard applies to electrical and…

This National Standard of Canada is based on International Standard ISO 15190:2003. 1 Scope This International Standard specifies requirements for safe practices in the medical laboratory.

This National Standard of Canada is based on International Standard IEC 60335-2-31:2002. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric range hoods intended for installing above household cooking ranges, hobs and similar cooking appliances, their rated voltage being not more than 250 V. NOTE 101 The cooking appliance…

This National Standard of Canada is based on International Standard IEC 60335-2-76:2002. 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural, feral animal control and security fences may be electrified…

This National Standard of Canada is equivalent to International Standard IEC 60745-2-12; and is joint with UL 60745-2-12. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to concrete vibrators.