Conduites et ensembles de conduites à utiliser avec des appareils pour la distribution d'essenc...
Domaine d'application
1.1 Ces exigences concernent les conduites et les ensembles de conduites, y compris les conduites et
les ensembles de récupération des vapeurs, destinés à être utilisés sur les dispositifs de distribution de
carburants. Un ensemble de conduites pour liquides inflammables se compose d'une conduite flexible et
de raccords pouvant être fixés à l'équipement de…
Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentration...
Scope
1.1 These requirements cover valves that are intended to be used for the control of fluids and their
vapors for the fluids indicated in 1.3. They are of the type commonly used in piping systems and in the
assembly of motor fuel dispensing equipment. Valves covered by this standard are for use with
combustible fluids which are handled at temperatures normally within the range of –20°F (–…
Scope
1.1 These requirements cover the construction and operation of inert gas clean agent fire extinguishing
system units intended to be installed, inspected, tested, and maintained in accordance with the Standard
for Clean Agent Fire Extinguishing Systems, NFPA 2001 and with the National Fire Code of Canada.
Unités de système d'extinction aux agents propres à gaz inerte
Domaine d'application
1.1 Les présentes exigences s'appliquent à la construction et à l'utilisation des unités de système
d'extinction aux agents propres à gaz inerte conçues pour être installées, inspectées, mises à l'essai et
entretenues en conformité avec la norme NFPA 2001, Standard on Clean Agent Fire Extinguishing
Systems, et avec le Code national de prévention…
Scope
1.1 These requirements apply to factory-built gas-fired package boilers having input ratings of more than
400,000 Btu/h (117,228 W), per individual combustion chamber, having the following:
a) For the United States: Inlet/supply pressures up to 15 psi (103 kPa), and intended primarily for
commercial and industrial installation;
b) For Canada: Inlet/supply gas pressures ?0.5 psi (3.4…
Vapour control systems in gasoline distribution networks
Scope
This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing
procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including
terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I controls (see Figure 1 for a
schematic representation).
This standard does not…
Containment Sumps, Fittings and Accessories for Flammable and Combustible Liquids
Scope
1.1 This Standard sets forth the minimum requirements for containment sumps, and associated sump
fittings and accessories (products) intended for below-grade, or at-grade, or above-grade use as an
enclosure for the housing of, and access to, underground piping, connector piping, and other fueling
system components (such as pumps, valves, sensors, wiring, etc.), in addition to temporary…
Scope
1.1 These requirements apply to ultraviolet germicidal irradiation (UVGI) equipment and systems
intended for installation and use in accordance with the U.S. National Electrical Code (NEC), NFPA 70 and
in accordance with the Canadian Electrical Code, Part I (CEC), CSA C22.1. These requirements cover:
a) UV Germicidal Equipment – These devices emit uncontained UV energy into the…
Flexible Connector Piping for Flammable and Combustible Liquids
Scope
1.1 This Standard sets forth the minimum requirements for cover primary, secondary, and coaxial types
of flexible connector pipes intended for short length transfer and containment of the specific flammable
and combustible liquids (or vapors thereof) identified in this Standard, at commercial (public) or fleet
(private) automotive motor vehicle fueling stations or similar fuel…
Tuyaux de raccordement flexibles pour liquides inflammables et combustibles
Domaine d’application
1.1 La présente norme fournit les exigences minimums pour les types principaux, secondaires et
coaxiaux de tuyaux de raccordement flexibles destinés au transfert et à la rétention sur de courtes
distances de liquides (ou vapeurs) inflammables et combustibles spécifiques, comme décrit dans la
présente norme, dans les postes de ravitaillement commerciaux (publics) ou de…