Search

1.1 Cette norme spécifie les méthodes à utiliser pour déterminer et consigner les caractéristiques de performance des systèmes de conversion d'énergie éolienne (SCEE). 1.2 Cette norme s'applique aux SCEE produisant une puissance mécanique, électrique ou thermique. 1.3 Cette norme ne porte pas sur le bruit produit pas les SCEE, mais indique le niveau de bruit global. 1.4 Cette norme…

1.1 Généralités La présente norme traite des aspects reliés au génie géotechnique des : a) plates-formes à embases-poids ; b) ouvrages auxiliaires en remblai ; c) plates-formes ballastables ; et d) plates-formes sur piles. Elle aborde notamment la reconnaissance des sites, les principes de calcul généraux, les effets pédologiques et les effets des phénomènes naturels sur les…

1.1 Scope This Standard sets forth the definition of blended hydraulic cement; its chemical and physical requirements; the tests required; the procedures for inspection and sampling; the units of measurement; the packaging, marking, and storage; the methods for chemical analysis; the methods for physical testing; and the equipment and materials used in performing the required tests. The…

1.1 This Standard specifies the minimum requirements for factory-built, single or multiple-piece roof vent flashings used to effect a permanent weather seal between the flashing and the vent pipe without the use of additional sealing materials around the vent pipe. Flashings fabricated on-site are not included. 1.2 The Standard includes requirements for material, quality of work, and…

May be used to establish whether conditions at the job site are suitable for painting or not. The method specified is based on measuring air temperature and relative humidity, calculating the dew-point, measuring the steel surface temperature, and estimating the minimum surface temperature (above the dew-point) that is needed to avoid condensation under the prevailing environmental conditions.…

1.1.1 This Code applies to the installation of systems for the production, handling, storage, and utilization of digester gas in newly-constructed wastewater treatment plants, as well as additions to, and the upgrading of, existing systems. 1.1.2 This Code applies to the installation of systems for the production, handling, and utilization of landfill gas in newly-constructed landfill gas…

Specifies site hydrostatic acceptance tests for installed pressure and non-pressure pipelines used for conveying water and other liquids. Does not cover testing of pipelines for gas.

Applies to electrical installations such as those of: a)residential premises b)commercial premises c)public premises d)industrial premises e)agricultural and horticultural premises f)prefabricated buildings g)caravans, caravan sites and similar sites h)construction sites, exhibitions, fairs and other temporary installations. i)marinas and pleasure craft Covers: a)circuits supplied at nominal…

Reviews the current status of direct and indirect bedload measurement techniques. The methods are mainly based on size distribution of the bedload material, channel width, depth and flow velocity. Includes discussion of various types of sampling devices and site selection.

Applies to free-standing and built-in domestic solid fuel-burning appliances which are able to be fully assembled prior to being transported to the installation site. The test method is based on installation of the appliance within a prescribed environment (test enclosure constructed of timber studs and plywood), firing using a specified procedure, monitoring of the temperatures at appropriate…