Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — P...
La présente partie de l'ISO 8528 définit des méthodes de mesurage pour la détermination du bruit aérien émis par les groupes électrogènes entraînés par moteurs alternatifs à combustion interne de façon que le bruit total du groupe électrogène (par exemple le bruit à l'échappement, le bruit du système de refroidissement, ainsi que le bruit de toutes autres sources du moteur) soit évalué…
Medical electrical equipment - Part 2-1: Particular requirements for the safety of electron accelera...
Establishes requirements to be complied with by manufacturers in the design and construction of electron accelerators for use in radiotherapy and defines type tests and site tests. Places limits on the degradation of equipment performance beyond which it can be presumed that a fault condition exists and where an interlock then operates to prevent continued operation of the equipment.
Appareils électromédicaux - Partie 2-1: Règles particulières de sécurité pour les accélérateurs d...
Etablit les prescriptions auxquelles il convient que les constructeurs se conforment dans la conception et la construction des accélérateurs d'électrons utilisés en radiothérapie et décrit des essais de type et des essais sur le site. Fixe des limites de détérioration des performances des appareils qui seraient la conséquence d'une condition de défaut pour lesquelles un verrouillage…
Safety of household and similar electrical appliances - Part 2-2: Particular requirements for vacuum...
Is to be used in conjunction with IEC 60335-1, third edition. Deals with the safety for vacuum cleaners and electric water suction cleaning appliances, for household and similar purposes, including vacuum cleaners for animal grooming whose rated voltage is not more than 250 V. Also applies to centrally-sited vacuum cleaners.
Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium
Density, Material -...
1. SCOPe
1.1 This Standard specifies the requirements and test methods for
spray-applied rigid polyurethane cellular plastics used as thermal insulation
in buildings and other applications, when applied either "on site" or in a
manufacturing facility.
1.2 The spray-applied rigid polyurethane cellular plastic thermal insulation
shall not be used when the continuous service…
Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium
Density, Installer&...
1. Scope
1.1 This standard provides procedures to installers of spray-applied rigid
polyurethane cellular plastic used as thermal insulation in building
construction and other applications, whether applied either "on site" or in a
manufacturing facility.
1.2 The procedures include selection of chemical components, application,
quality control and documentation of the…
Geotextiles and geotextile-related products — Procedure for simulating damage during installation — ...
La présente prénorme internationale décrit une procédure d'endommagement des géosynthétiques en laboratoire pour simuler l'endommagement sur site lors de la pose d'un géosynthétique entre deux couches de matériaux granulaires compactés. L'endommagement est évalué visuellement ainsi que la détermination de la perte de résistance de traction. D'autres essais de référence…
1. Scope
1.1
This Standard sets forth methods for both new installation and replacement
installation of factory-assembled windows and exterior doors that are intended
for vertical installation in small buildings primarily used for residential
occupancy.
1.2
This Standard provides minimum requirements that will help to ensure the
installation of windows in an effective manner, such…