Search

This part of ISO 10303 specifies the interpretation of the integrated resources to satisfy requirements for the definition of the hierarchical structure of drawings and the administration information to manage drawings and relate a product to the drawing. The following are within the scope of this part of ISO 10303: — the structures for representing a drawing that depicts any phase of design; —…

1. Scope 1.1 This Standard provides procedures for evaluating polymeric materials and parts made from polymeric materials intended for application in electrical equipment covered by the Canadian Electrical Code, Part II (CEC, Part II), with respect to: (a) flammability; (b) mechanical properties; (c) thermal properties; (d) resistance to weathering; and (e) electrical properties. 1…

1. SCOPE 1.1 This standard applies to a clear, oil-free. polyurethane coating containing an isocyanate-terminated polymer that is cured or hardened by reaction with atmospheric moisture. 1.2 This coating is intended for interior applications on concrete and wood where enhanced resistance to physical and chemical attack is required. 1.3 The testing and evaluation of a…

1. SCOPE 1.1 This standard applies to alkyd primer for exterior use on wood under alkyd house paints, enamels and latex paints. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard…

1. SCOPE 1.1 This standard applies to a solvent-based undercoater for interior use on unprimed wood or on previously painted surfaces, before finishing with recommended topcoats. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects…

1. Scope 1.1 This standard applies to symbols that communicate instructions and directions about public services and safety to users of passenger transportation facilities. 1.2 This standard applies to bus, train, air and ship transportation facilities. 1.3 This standard addresses some of the needs of people with disabilities. 1.4 This standard does not cover all possible signage requirements…

1. Scope 1.1 This standard applies to air-drying heat-resistant enamel suitable for use on primed or previously painted interior and exterior metal surfaces that are subjected to a maximum temperature of 200ºC. 1.2 The enamel is intended for use on motor vehicles, gasoline, diesel and steam engines, steam turbines, pumps, structural members of boilers and boiler houses, and similar…

1. SCOPE 1.1 This standard applies to a factory-applied coating system (liquid and/or powdered coating) of semigloss baked finish for metal office furniture including desks, run-offs, credenzas, filing cabinets, card files, modular shelving, costumers, waste baskets and related office equipment. 1.2 This standard does not cover maintenance refinishing or old metal furniture.…

1. SCOPE 1.1 This standard applies to a cold-curing, high-build, gloss, two-component epoxy coating for use on unpainted surfaces where good impact, water resistance, superior washability and long life are required. 1.2 The coating is suitable for application over practically any properly prepared surface including wood, wallboard, gypsum board, dry plaster, brick, concrete, concrete…

1. SCOPE 1.1 This standard applies to a latex primer-sealer for use on previously unpainted interior surfaces such as dry plaster (having a moisture content of not more than 12% as indicated by a moisture meter), plasterboard, wallboard, wood and on previously painted porous surfaces with a flat finish. Normally this primer-sealer may be topcoated 3 h after application. 1.2 The…