Search

1. SCOPE 1.1 This standard applies to a quick-drying alkyd primer for use over steel that has been blast cleaned in accordance with SSPC-SP 6. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this…

1. SCOPE 1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated laboratory test. 1.2 This procedure, based on ASTM standard test methods C 1303 and C 518, can be applied to a wide range of preformed as well as field applied…

ISO 14507:2003 specifies three methods for the pretreatment of soil samples in the laboratory prior to the determination of organic contaminants: if volatile organic compounds are to be measured;if moderately volatile to non-volatile organic compounds are to be measured, if the result of the subsequent analysis must be accurate and reproducible, and if the sample contains particles larger than 2…

ISO/IEC 19460:2003 specifies the signalling protocol for the support of the Single Step Call Transfer supplementary service (SS-SSCT) at the Q reference point between Private Integrated Network services eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). SS-SSCT is a supplementary service which enables a user, user A, to transform an existing call between…

ISO/IEC 19460:2003 specifies the signalling protocol for the support of the Single Step Call Transfer supplementary service (SS-SSCT) at the Q reference point between Private Integrated Network services eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). SS-SSCT is a supplementary service which enables a user, user A, to transform an existing call between…

ISO 25539-1:2003 specifies requirements for endovascular prostheses, based upon current medical knowledge. With regard to safety, it gives requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization packaging and information supplied by the manufacturer. It should be considered as a supplement to ISO 14630, which specifies general…

ISO 15616-1:2003 is applicable to CO2-laser beam machines for welding and cutting in two operating directions. The main purpose of this International Standard is to provide requirements for acceptance testing of CO2-laser beam machines prior to or during installation at the user's premises. The acceptance tests are used to document the ability of CO2-laser beam machines to produce welded…

ISO 1458 specifies requirements for nickel electrodeposited coatings that are applied to iron and steel, to zinc alloys, to copper or copper alloys, and to aluminium and aluminium alloys to provide an attractive appearance and corrosion resistance. In addition, it specifies requirements for copper plus nickel coatings applied to iron and steel, and to zinc alloys. Coating designations that differ…

This National Standard of Canada is equivalent to International Standard ISO/IEC 7811-6:2001 (second edition, 2001-02-01). 1 Scope This part of ISO/IEC 7811 is one of a series of standards describing the characteristics for identification cards as defined in the definitions clause and the use of such cards for international interchange. This part of ISO/IEC 7811 specifies requirements…

This National Standard of Canada is equivalent to International Standard ISO/IEC 14651:2001 (first edition, 2001-02-15). 1. Scope This International Standard defines: - A reference comparison method. This method is applicable to two character strings to determine their relative order. The method can be applied to strings containing characters from the full repertoire of ISO/IEC 10646-1.…