Search

1.1 This Standard provides the requirements for the certification of companies engaged in the fusion welding of steel and the qualification of their personnel and welding procedures. Notes: (1) Certification may be mandatory or voluntary. (2) This Standard is not intended for applications governed by codes such as the American Society of Mechanical Engineers (ASME) Boiler and Pressure…

1. SCOPE 1.1 This standard applies to the design, colour, materials, construction and performance requirements of the National Flag of Canada intended for outdoor use. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with…

ISO 11262:2003 is applicable to as-received soil samples, and specifies two quantification methods for the determination of easily released and complex cyanides. It is not always necessary to determine easily released cyanide prior to the measurement of complex cyanide. In this instance, the first part of the distillation process is omitted so that only the total cyanide is determined. The…

1. SCOPE 1.1 This standard defines minimum product and warranty service requirements for the procurement of microcomputerbased equipment. 1.2 This standard excludes any items not defined as equipment in Section 3. 1.3 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address…

1. SCOPE 1.1 This standard applies to ready-mixed, semigloss enamel suitable for use on primed, sealed or previously painted nonporous interior surfaces, with the exception of floors. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects…

1. SCOPE 1.1 This standard applies to interior alkyd low gloss enamel intended for use as a topcoat on primed, sealed or previously painted nonporous interior walls and woodwork where good cleansability and stain resistance is needed. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document…

1. SCOPE 1.1 This standard applies to quick-drying latex wood primer suitable for use on exterior unpainted and previously painted wood. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this…

1. PURPOSE AND SCOPE 1.1 This method is intended for the removal and quantitative determination of certain types of non-fibrous materials that may be present on textiles. 1.2 Owing to the wide variety of substances that may be added to textile materials during manufacture, and to the difficulty of removing some of them, this method does not provide procedures for the removal of all types…

1. SCOPE 1.1 This standard applies to a sealer used to prevent the release of asbestos fibres from asbestos-containing materials. This sealer is not suitable for highly friable materials.(1) 1.2 This standard helps the user to select a specific type and class of sealer, described in par. 3.1. It does not address concerns about any change in properties or characteristics of the material,…

1. SCOPE 1.1 This standard applies to an interior latex low gloss paint for use on walls and ceilings, either new or previously painted. 1.2 The paint is suitable for most types of wall surfaces, including wallboard, gypsum board, dry plaster, cement, brick and concrete block. For bathrooms and kitchens, coatings complying with CAN/CGSB-1.195 or CAN/CGSB-1.202, Type 2 may be preferable…