Search

ISO/TS 23810:2006 covers activities performed by perfusionists during equipment setup prior to cardiopulmonary bypass (CPB), extracorporeal membrane oxygenation (ECMO), cardiopulmonary support (CPS), left or right heart bypass (LHB, RHB) and venovenous (VV) extracorporeal support for liver transplantation.

ISO 12176-1:2006 specifies the general characteristics of, and performance requirements for, equipment for butt fusion jointing of polyethylene (PE) piping systems using electric heaters. It is applicable to mechanical and pressure-activated equipment for butt fusion jointing PE pipes and fittings either intended to be used for the supply of gaseous fuels, conforming to ISO 4437 and ISO 8085-2,…

1 Scope This part of IEC 61482 specifies test methods to measure the arc thermal performance value of materials intended for use in heat- and flame-resistant clothing for workers exposed to electric arcs. These test methods measure the arc thermal performance value of materials which meet the following requirements: less than 100 mm char length and less than 2 s afterflame after removal…

The CSA Standard is based on International Standard ISO 7396-1:2002. 1 Scope 1.1 This Standard specifies safety requirements for medical gas pipeline systems in health care facilities. It is intended for use by anyone involved in the design, construction, inspection, and operation of medical gas systems. 1.2 The provisions of this Standard are intended to ensure that each medical gas…

1. SCOPE 1.1 This standard applies to two grades of liquefied petroleum gas (LPG) used only for fuel purposes. These grades consist mainly of propane and propene (propylene). 1.2 Grade 1 is intended for use in internal combustion engines and for general industrial and commercial fuel applications. Grade 1 maintains a minimum octane quality by limiting concentrations of low-octane components.…

ISO 22314:2006 specifies a method of determining the length of the fibres present in a fibre-reinforced product. The method is applicable to moulding materials and to moulded parts. The test conditions specified limit the application of this method to thermoplastics reinforced with short glass fibres (less than 1 mm long), i.e. fibres whose length is less than or equal to 7,5 mm prior to…

ISO 5667-5:2006 establishes principles to be applied to the techniques of sampling water intended for human consumption. For the purposes of ISO 5667-5:2006, water intended for human consumption comprises: all water either in its original state or after treatment, intended for drinking, cooking, food preparation, or other domestic purposes, regardless of its origin, plus all water used in any…

This National Standard of Canada is equivalent to International Standard ISO 17664:2004. 1 Scope This standard specifies the information to be provided by the medical device manufacturer on the processing of medical devices claimed to be re-sterilizable and medical devices intended to be sterilized by the processor. This standard specifies requirements for the information to be provided by the…

1. SCOPE 1.1 This method is intended for the semi-quantitative (i.e., ±25%1) determination of ethyl mercaptan odorant (within the range of 5 to 85 mg/L) in liquid propane. It is important to confirm that recently stenched propane is odorized to the required level. The method is intended for field application and may be suitable for use by non-laboratory personnel after suitable training. A gas…

Studies of the emission of volatile organic compounds from unused building products or furnishing in test chambers or cells require proper handling of the product prior to testing, and during the testing period. ISO 16000-11:2006 defines three types of building products or furnishing: solid, liquid and combined. For each type, specifications are given for the sampling procedures, transport…