Search

IEC 61340-4-4:2012 specifies requirements for flexible intermediate bulk containers (FIBC) between 0,25 m3 and 3 m3 in volume, intended for use in hazardous explosive atmospheres. The explosive atmosphere may be created by the contents in the FIBC or may exist outside the FIBC. The requirements include: - classification and labelling of FIBC; - classification of inner liners; - specification of…

1. SCOPE 1.1 This standard applies to four grades of oxygenated gasoline to which no lead or phosphorus compounds have been added, and in which the oxygenate consists essentially of ethanol. They are intended for use in spark ignition engines under a wide range of climatic conditions. 1.2 This standard is not intended to apply to the mixing of oxygenated gasolines and gasolines either at the…

1. SCOPE 1.1 This standard applies to denatured fuel ethanol, a blendstock that is used solely as a component of automotive spark ignition fuels. 1.1.1 These automotive spark ignition fuels include: CAN/CGSB-3.511 — Oxygenated Automotive Gasoline Containing Ethanol (E1-E10), and CAN/CGSB-3.512 — Automotive Ethanol Fuel (E50–E85). 1.2 The testing and evaluation of a product against this…

1. SCOPE 1.1 This standard applies to two types of automotive diesel fuel containing low levels of biodiesel: Type A-ULS, Bx and Type B-ULS, Bx. 1.1.1 Bx represents biodiesel fuel containing x percent by volume of biodiesel component in the range of 1.0 to 5%. 1.2 Fuel to this standard is intended for use in high-speed diesel engines that require ultra low sulphur diesel fuel to meet emission…

1. SCOPE 1.1 This standard applies to one class of Type B ultra low sulphur diesel fuel (<15 ppm S) containing from 6% to 20% by volume of biodiesel. 1.1.1 Users of fuel meeting this standard are advised to refer to the owner’s manual of their vehicle, engine or equipment, or to consult with their equipment’s manufacturer regarding the suitability of the specific fuel blend prior to its use…

1. SCOPE 1.1 This standard applies to one grade of biodiesel that is intended for use as a blending component in middle distillate fuels. 1.1.1 Biodiesel meeting this standard is not intended for use as a fuel in its neat form. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not…

1. SCOPE 1.1 This standard applies to four grades of gasoline to which no lead or phosphorus compounds have been added. They are intended for use in spark ignition engines under a wide range of climatic conditions. 1.2 This standard is not intended to apply to the mixing of oxygenated gasolines and gasolines, either at the point of retail sale or after the point of retail sale. 1.3 Gasoline…

1.1 This Standard specifies the requirements and test methods for bead-applied one component polyurethane foam used as an insulating air sealant for both building and non-building applications. This Standard covers bead-applied one-component polyurethane air sealant foam whether applied on a building site or in a prefabrication (manufacturing) process. The one-component polyurethane foam is…

1.1 This Standard outlines requirements for the installation of factory pre-packaged bead-applied one component polyurethane foam used as an insulating air sealant for both building and non-building applications. The material is installed as air sealant foam in holes, cracks or gaps in buildings or in a prefabrication (manufacturing) process. 1.2 The requirements in this Standard apply for both…

1.1 This Standard specifies the requirements and test methods for thermal insulating bead - applied two-component polyurethane foam used as an insulating air sealant for both building and non-building applications. This Standard covers bead-applied two-component polyurethane air sealant foam whether applied on a building site or in a prefabrication (manufacturing) process. This two-component…