1. SCOPE
1.1 This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. Kerosene-type aviation turbine fuels are distillates with a minimum flash point of 38°C.
1.1.1 The two grades differ only in freezing point.…
Aviation Turbine Fuel (Military Grades F-34 and F-44)
1. SCOPE
1.1 This standard applies to two grades of aviation turbine fuel (military grades F-34 and F-44) consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as herein.
1.1.1 Grade F-34 is a kerosene-type aviation turbine fuel, and grade F-44 is a high-flash kerosene-type aviation turbine fuel. Kerosene-type aviation turbine fuels…
1. SCOPE
1.1 This standard applies to suit systems to be worn by helicopter passengers during transportation over water where thermal protection may be required.
1.2 The primary function of a suit system meeting this standard is to provide the helicopter passenger protection from the effects of cold water during the initial hours of immersion.
1.3 Helicopter passenger transportation suit…
Leather — Physical and mechanical test methods for the determination of soiling — Part 1: Rubbing (M...
ISO 26082-1:2012 specifies a method for determining the resistance of all forms of leather to visible soiling through repeated contact with soiled objects. It provides a physical pretreatment routine for leathers that may be vulnerable to loss of soiling resistance while in service, prior to conducting further tests such as cleaning.
Chemical sterilization of reusable medical devices in health care facilities
Scope
1.1
This Standard specifies essential elements in implementing a program for using chemicals to sterilize medical devices in health care facilities. Such chemicals can be vapour, gaseous, or liquid and are delivered in validated concentrations and quantities in defined sterilizers.
The body of this Standard contains requirements that are common to all chemical sterilization processes,…
Test Methods For Hydrogen Fueling Parameter Evaluation
This standard establishes the test method, criteria, and apparatus to evaluate a hydrogen fueling station as it relates to achieving the protocol specified in SAE TIR J2601 – 2010, Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles, for fueling, and the SAE TIR J2799, 70 MPa Compressed Hydrogen Surface Vehicle Fueling Connection Device and Optional Vehicle to Station…
Commissioning of electrical, instrumentation and control systems in the process industry - Specific ...
IEC 62337:2012 defines specific phases and milestones in the commissioning of electrical, instrumentation and control systems in the process industry. By way of example, it describes activities following the "completion-of-erection" milestone of the project and prior to the "acceptance-of-the-plant" phase by the owner. Such activities need to be adapted for each type of…
Structural adhesives — Guidelines for the surface preparation of metals and plastics prior to adhesi...
ISO 17212:2012 provides and describes the usual procedures for the preparation of component surfaces prior to bonding for either laboratory evaluation or the process of construction. It is applicable to metal and plastic surfaces that are commonly encountered.
STANDARD FOR FLAT WALL INSULATING CONCRETE FORM (ICF) UNITS
1.1 This Standard specifies the requirements for stay in place, modular expanded polystyrene (EPS)
Insulating Concrete Form (ICF) units. Once filled with concrete, the ICF units remain in place as the
thermal insulation for the resulting cast-in-place concrete wall of uniform cross-section and thickness.
1.2 The requirements of this Standard apply to ICFs that act as permanent formwork for cast-…
Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled syst...
ISO16431:2012 defines methods
to measure the cleanliness of a fluid in an assembled hydraulic fluid power system,
to verify a required system cleanliness upon release of the system from the production area, and
if needed, to clean the system to the required cleanliness level.
The clean-up procedure specified in ISO16431:2012 is not intended to replace proper system…