Search

1 Scope 1.1 Organization and content This standard prescribes containers for handling, offering for transport and transport of Explosives, Class 1. This standard consists of three parts and four annexes. Part 1 specifies general requirements for the selection and use of containers including application, packaging provisions, re-use of packagings and special cases including display…

The purpose of ISO/IEC 23000-6 Professional archival application format (PA-AF) is to provide a standardized packaging format for digital files. This packaging format can also serve as an implementation of the information package specified by the Reference Model of Open Archival Information System (OAIS). The OAIS Reference Model is a framework for understanding and applying concepts necessary…

The purpose of ISO/IEC 23000-6 Professional archival application format (PA-AF) is to provide a standardized packaging format for digital files. This packaging format can also serve as an implementation of the information package specified by the Reference Model of Open Archival Information System (OAIS). The OAIS Reference Model is a framework for understanding and applying concepts necessary…

1. SCOPE 1.1 This standard applies to JET B wide-cut type aviation turbine fuel, consisting of hydrocarbons, and naturally occurring non-hydrocarbons derived from petroleum, and additives as specified herein. Wide-cut type aviation fuels are low flash, volatile naphtha and kerosene blends, having a wide boiling range and a low-freezing point. Note: Volatility is not controlled by flash point…

ISO 8217:2012 specifies the requirements for petroleum fuels for use in marine diesel engines and boilers, prior to appropriate treatment before use. The specifications for fuels in ISO 8217:2012 can also be applicable to fuels for stationary diesel engines of the same or similar make and type as those used for marine purposes. ISO 8217:2012 specifies four categories of distillate fuel, one of…

Scope 1.1 General 1.1.1 Requirements for nuclear power plants and nuclear facilities This Standard describes the requirements for seismic instrumentation systems for nuclear power plants and nuclear facilities to monitor site-specific seismic responses. These plants and facilities include (a) existing nuclear power plants and on-site nuclear facilities (e.g., spent fuel bays, dry fuel…

ISO 26262 is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production passenger cars with a maximum gross vehicle mass up to 3 500 kg. ISO 26262 does not address unique E/E systems in special purpose vehicles such as vehicles designed for drivers with disabilities. Systems and their components…

ISO 12219-1:2012 describes and specifies the whole vehicle test chamber, the vapour sampling assembly and the operating conditions for the determination of volatile organic compounds (VOCs), and carbonyl compounds in vehicle cabin air. There are three measurements performed: one (for VOCs and carbonyl compounds) during the simulation of ambient conditions (ambient mode) at standard conditions of…

ISO 16000-19:2012 describes the measurement strategy for the detection of fungi in indoor environments. ISO 16000-19:2012 describes suitable sampling and analysis methods together with a description of the applicability and the interpretation of the measurement results to maximize the comparability of the measured data obtained for a given measurement objective. It does not include details on…

ISO/TS 23810:2012 covers the activities performed by perfusionists during preoperative extracorporeal circulation (ECC) equipment setup prior to cardiopulmonary bypass (CPB), extracorporeal membrane oxygenation (ECMO), cardiopulmonary support (CPS), left or right heart bypass (LHB/RHB) or venovenous (VV) extracorporeal support for liver transplantation. Its requirements can serve as a checklist…