Search

ISO 14388-1:2014 provides a general introduction to acid sulfate soils and the approaches that can be used to measure the various components of this special group of soils and their potential to produce acidity. It provides a compilation of the test methods, identification and definitions of the symbols, terms, and acronyms used in this series of ISO 14388. While part of the decision-making…

ISO Guide 80 outlines the essential characteristics of reference materials for quality control (QC) purposes, and describes the processes by which they can be prepared by competent staff within the facility in which they will be used (i.e. where instability due to transportation conditions is avoided). The content of this Guide also applies to inherently stable materials, which can be transported…

ISO 15366-1:2014 describes procedures to chemically separate and purify uranium and plutonium in dissolved solutions of irradiated light water reactor fuels and in samples of high active liquid waste of spent fuel reprocessing plants, prior to their isotopic analysis by e.g. mass spectrometric method or alpha spectrometry. ISO 15366-1:2014 describes a technique for the separation of uranium and…

ISO 15366-2:2014 describes procedures to chemically separate and purify uranium and plutonium in dissolved solutions of irradiated light water reactor fuels and in samples of high active liquid waste of spent fuel reprocessing plants, prior to their isotopic analysis by e.g. mass spectrometric method or alpha spectrometry. ISO 15366-2:2014 describes a slightly different separation technique from…

ISO 13354:2014 specifies requirements for the selection of the diverter equipment for rigs used to drill shallow-gas-bearing formations. It covers both onshore and offshore drilling operations, and considers also the auxiliary equipment associated with floating rigs. The specified requirements concern the following diverter equipment: annular sealing devices; vent outlets; diverter valves;…

ISO/TS 17137:2014 outlines design verification and validation considerations for absorbable cardiovascular implants. ISO/TS 17137:2014 is applicable to implants in direct contact with the cardiovascular system, where the intended action is upon the circulatory system. ISO/TS 17137:2014 does not address the specific evaluation of issues associated with viable tissues, viable cells, and/or implants…

Scope This National Standard of Canada applies to the minimum requirements for performance of fireline workwear used for the protection against the adverse effects to the firefighter’s body during wildland firefighting, or prescribed fire operations. It also provides guidance for the selection, use, maintenance and retirement of such workwear and for understanding its limitations. This…

Scope This National Standard of Canada contains a list of generic names, for technical and commercial use, for the different categories of man-made fibres manufactured at present on an industrial scale for textile and other purposes. This standard contains all of the generic names contained in International Standard ISO 2076. Generic names for other fibres in general use on the North American…

Scope This National Standard of Canada applies to polyester/cotton twill fabric with a durable press finish of two different masses per unit area: 170 g/m2 and 245 g/m2. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its use…

Scope This National Standard of Canada applies to fabric of three different masses per unit area (105 g/m2, 150 g/m2 and 170 g/m2) made from yarns that are a blend of 65% polyester and 35% cotton. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety…