Search

ISO 16993:2015 gives formulae which allow analytical data relating to solid biofuels to be expressed on the different bases in common use. Consideration is given to corrections that can be applied to certain determined values for solid biofuels prior to their calculation to other bases.

ISO 18413:2015 specifies the content of an inspection document that specifies both the cleanliness requirement for the specified hydraulic fluid power component and the inspection method to be used for evaluating its cleanliness level. In addition, guidelines for relevant extraction methods and analysis methods are given. Determination of what constitutes as an appropriate cleanliness level…

ISO/TR 14645:2015 describes dummies, procedures, and configurations that can be used to investigate the interactions that occur between a deploying air bag and a Child Restraint System (CRS) that would have been considered properly installed and used in the outer and centre front passenger positions. Static tests can be used to sort CRS/air bag interaction on a comparative basis in either an…

ISO 14085-2:2015 specifies - a procedure to thermally condition a hydraulic filter element to presumed aerospace hydraulic system stresses, - a test procedure to complete cold soaks, hot soaks, and temperature variation in a combined manner, and - a test procedure to simulate cold starts. ISO 14085-2:2015 is not intended to qualify a filter element under replicate conditions of…

ISO 14085-6:2015 defines a reference method for determining the level of cleanliness of new filter elements for use in aircraft hydraulic systems, after production prior to shipment, or prior to installation in the circuit. It applies to filter elements used on systems requiring fluid cleanliness conditions defined in the particular specification. The tests data resulting from application of this…

1 SCOPE 1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated laboratory test. 1.2 This procedure, based on ASTM standard test methods ASTM C1303 and ASTM C518, can be applied to a wide range of preformed as well as field…

1 Scope This standard applies to three types of middle distillate fuel oils that are suitable for use in liquid-fuel-burning equipment without preheating (Types 0, 1 and 2), and three types of fuel oils that contain residual fuel components and require preheating (Types 4, 5 and 6). The heating fuel oils covered by this standard are intended for use in oil burning equipment to generate heat for…

This is the third edition of CAN/CSA-C22.2 No. 60601-2-11, Medical electrical equipment — Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60601-2-11 (third edition, 2013-01). It supersedes the previous…

1.1 This Standard covers material, manufacturing, and class dimensional requirements for seasoned wood poles and reinforcing stubs that are primarily intended for the support of electrical power or communication lines. 1.2 This Standard does not cover requirements for wood poles intended for use in structures such as bridges and buildings. 1.3 This Standard does not cover requirements for the…

"SCORM" stands for "Sharable Content Object Reference Model." A "reference model" is something that shows what kinds of services will be needed to solve a particular problem, how they can be put together, the relevant standards that apply, and how they might be used. There are three primary criteria for a reference model such as SCORM. First, it must articulate…