Search

ISO 7870-6:2016 covers EWMA control charts as a statistical process control technique to detect small shifts in the process mean. It makes possible the faster detection of small to moderate shifts in the process average. In this chart, the process average is evaluated in terms of exponentially weighted moving average of all prior sample means. EWMA weights samples in geometrically decreasing…

ISO/IEC 23001-7:2016 specifies common encryption formats for use in any file format based on ISO/IEC 14496‑12. File, track, and track fragment metadata is specified to enable multiple digital rights and key management systems (DRMs) to access the same common encrypted file or stream. This part of ISO/IEC 23001 does not define a DRM system. The AES-128 symmetric block cipher is incorporated by…

ISO/TS 15066:2016 specifies safety requirements for collaborative industrial robot systems and the work environment, and supplements the requirements and guidance on collaborative industrial robot operation given in ISO 10218‑1 and ISO 10218‑2. ISO/TS 15066:2016 applies to industrial robot systems as described in ISO 10218‑1 and ISO 10218‑2. It does not apply to non-industrial robots, although…

This method determines the tearing strength of woven fabrics by the single-rip procedure. The testing and evaluation of a product against this method may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this method has the responsibility to consult the appropriate…

1.1 This Standard contains the physical property requirements, and test methods to determine these properties, for wood fibre manufactured in the form of faced or unfaced boards, sheets or panels used for insulation in buildings and other applications, whether applied on a building site or in a prefabrication (manufacturing) facility. 1.2 The Standard covers two types of wood fibre insulation…

ISO 19281:2016 the minimum design and performance criteria and testing methods of passive fire resistant containers (FRCs) for carriage on aircraft main deck, to be used on either of the following: a) in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations; b) on a voluntary basis, when deemed appropriate…

1.1 This International Standard specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct counting method. 1.2 This International Standard is applicable to a) single yarns (spun and filament), b) plied yarns, and c) cabled yarns. Separate procedures are given for…

This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. The fuels are normally used in civil aviation operations. The two grades differ only in freezing point. Grade JET A has a maximum freezing point of -40°C…

ISO 18563-3:2015 addresses ultrasonic test systems implementing linear phased array probes, in contact (with or without wedge) or in immersion, with centre frequencies in the range of 0,5 MHz?10 MHz. It provides methods and acceptance criteria for verifying the performance of combined equipment (i.e. instrument, probe and cables connected). The methods described are suitable for users working…

1 Scope This part of ISO/IEC 7811 is one of a series of International Standards describing the parameters for identification cards as defined in the definitions clause and the use of such cards for international interchange. This part of ISO/IEC 7811 specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use…