STANDARD FOR SITE QUALITY ASSURANCE PROGRAM FOR SPRAY APPLIED POLYURETHANE FOAM
1 SCOPE
1.1 This standard outlines the requirements for a site quality assurance program (SQAP) for the on-site
installation of spray applied polyurethane foam (SPF). As the installation of the material is dependent on
the installer, a site quality assurance program is required to provide assurance of compliance to material
and installation standards to the property owner, authority having…
Surface chemical analysis — Guidelines to sample handling, preparation and mounting — Part 4: Report...
ISO 20579-4:2018 identifies information to be reported in a datasheet, certificate of analysis, report or other publication regarding the handling of nano-objects in preparation for surface chemical analysis. This information is needed to ensure reliability and reproducibility of analyses needed to advance research and technology using these materials, and for obtaining appropriate understanding…
1 Scope
This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting
of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as
specified herein.
The fuels are normally used in civil aviation operations. The two grades differ only in freezing point. Grade JET A
has a maximum freezing point…
Aviation turbine fuel (Military grades F-34, F-37 and F-44)
1 Scope
This standard applies to three grades of aviation turbine fuel (military grades F-34, F-37 as its equivalent, and
F-44) consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and
additives as specified herein.
Grade F-34 is a kerosene-type aviation turbine fuel, and grade F-44 is a high-flash kerosene-type aviation turbine
fuel. Kerosene…
Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 2: Re...
ISO 21225-2:2018 specifies requirements and test methods for pipes and fittings which are part of plastics piping systems for the trenchless replacement of various underground pipeline networks, underground non-pressure and pressure drainage and sewerage networks and underground water and gas supply networks, by means of horizontal directional drilling and impact moling.
ISO 21225-2:2018 is…
Products and related services — Information for consumers
ISO/IEC Guide 14:2018 provides guidance on the provision of information concerning products and their related services intended for consumers. It outlines general principles and recommendations for content, methods, formats and designs enabling consumers to compare and choose consumer products and their related services prior to purchase.
Products and related services - Information for consumers
ISO/IEC Guide 14:2018 provides guidance on the provision of information concerning products and their related services intended for consumers. It outlines general principles and recommendations for content, methods, formats and designs enabling consumers to compare and choose consumer products and their related services prior to purchase.
Woodworking machines — Safety — Part 10: Building site saws (contractor saws)
ISO 19085-10:2018 gives the safety requirements and measures for displaceable building site saws, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as "machines".
NOTE 1 For the definition of displaceable machine, see ISO 19085‑1:2017, 3.5.
ISO 19085-10:2018 deals with all significant hazards, hazardous situations and events as…
1 Scope
This standard applies to one type of naphtha fuel suitable for use in catalytic-type heaters and in naphtha pressureappliances
such as stoves, lanterns, heating units and blowtorches.
The specified limiting values in this standard are present to allow the use of this naphtha fuel in catalytic heaters.
The use of other types of fuel in catalytic heaters such as fuels with a higher…
Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments...
ISO 2081:2018 specifies requirements for electroplated coatings of zinc with supplementary treatments on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the requirements for heat treatment before and after electroplating.
ISO 2081:2018 is not applicable to zinc coatings applied
- to sheet, strip or wire in the non-fabricated form,
- to…