Search

This standard applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. The fuels are normally used in civil aviation operations. The two grades differ only in freezing point. Grade JET A has a maximum freezing point of -40°C…

IEC 62281:2019 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 62281:2019 specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and…

IEC 62281:2019 specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this document do not apply in those cases where special provisions given in the relevant regulations, listed in 7.3, provide exemptions. NOTE Different standards may apply…

1.1 Organization and content This standard sets out the requirements for designing, manufacturing and marking of UN standardized large packagings and for selecting and using large packagings for the transportation of dangerous goods of Class 3, 4, 5, 6.1, 8 and 9. This standard consists of two parts and two annexes. Part I contains the requirements for the design, manufacture and marking of…

1 Scope 1.1 This Standard contains requirements for the installation of Exterior Insulation and Finish Systems (EIFS) that meet the material and system requirements of CAN/ULC-S716.1 and the design requirements of CAN/ULC-S716.3. 1.2 This standard applies to the installation of the EIFS components. It does not apply to the installation of the substrate. 1.3 This standard applies to the…

1 Scope 1.1 This Standard outlines requirements for Exterior Insulation and Finish Systems (EIFS) installed in accordance with CAN/ULC-S716.2 and designed in accordance with CAN/ULC-S716.3, and used in combination with a drained air space as an exterior wall cladding system. 1.2 The EIFS wall cladding system is comprised of a water resistive barrier assembly, thermal insulation boards,…

1 Scope 1.1 This Standard contains requirements for the design, selection and application of exterior cladding utilizing Exterior Insulation and Finish Systems (EIFS) that meet the requirements of CAN/ULC-S716.1, and for the interfaces between EIFS and other building components. 1.2 This Standard applies to both new installations and to retrofit installations of EIFS on both high-rise…

This document specifies a method for determining the flexural properties of rigid and semi-rigid plastics under defined conditions. A preferred test specimen is defined, but parameters are included for alternative specimen sizes for use where appropriate. A range of test speeds is included. The method is used to investigate the flexural behaviour of the test specimens and to determine the…

This document specifies a method for determining the resistance of all forms of leather to visible soiling through repeated contact with soiled objects. It provides a physical pretreatment routine for leathers that may be vulnerable to loss of soiling resistance while in service, prior to conducting further tests such as cleaning.

1 Scope This method provides a means of determining the degree of corrosiveness of gasoline and middle distillate fuels to silver or silver alloys used in fuel system components. This method also applies to oxygenated gasoline and diesel blends, intermediate streams or blending components such as alkylate, reformate, and isomerate. Units of measure — Quantities and dimensions in this…