Dentistry — Laboratory cutters — Part 1: Steel laboratory cutters
ISO 7787-1:2016 specifies dimensional and other requirements for the nine most commonly used steel cutters which are predominantly used in the dental laboratory.
Other characteristics of laboratory cutters, for example, spiralled blades or cross-cut, are not covered by this part of ISO 7787.
NOTE These cutters are also used in podiatry.
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
ISO 4892-1:2016 provides information and general guidance relevant to the selection and operation of the methods of exposure described in detail in subsequent parts. It also describes general performance requirements for devices used for exposing plastics to laboratory light sources. Information regarding performance requirements is for producers of artificial accelerated weathering or artificial…
Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation
ISO 14820-2:2016 specifies methods for the reduction and preparation of samples of fertilizers and liming materials and sets out the requirements for sample preparation reports. It also specifies methods for the preparation of test samples and test portions from laboratory samples of fertilizer for subsequent chemical or physical analysis. It does not cover the preparation of samples for certain…
Soil quality — Screening soils for isopropanol-extractable organic compounds by determining emulsifi...
ISO 17183:2016 specifies the procedure to screen highly contaminated soils to detect organic compounds extractable with isopropanol, including a wide range of fuels, oils, and greases. The method is useful for finding hot spots. It is applicable both in laboratories and for site screening in the field. The working range is approximately 0,01 to 0,3 in absorbance units, corresponding to…
Timber structures — Test methods — Floor vibration performance
ISO 18324:2016 specifies test procedures to measure natural frequencies, modal damping ratios and static deflection under a concentrated load of laboratory or field timber floors. These parameters have been found to correlate well with human perception to timber floor vibration response caused by human-induced excitation under normal use. It is intended that the test procedures can be applied in…
Water quality — Sampling — Part 24: Guidance on the auditing of water quality sampling
ISO 5667-24:2016 provides an audit protocol to monitor conformity with declared, or assumed, practices in all areas of water quality sampling. Specifically, this part of ISO 5667 provides guidance on the systematic assessment of sampling practices and procedures in the field, and assessing conformity with those given in the organization's sampling manual. It is applicable to the audit of…
Electroacoustics - Octave-band and fractional-octave-band filters - Part 3: Periodic tests
IEC 61260-3:2016 describes procedures for periodic testing of octave-band and fractional-octave-band filters that were designed to conform to the class 1 or class 2 specifications given in IEC 61260-1:2014. The aim of this standard is to ensure that periodic testing is performed in a consistent manner by all laboratories. This first edition of IEC 61260-3 (together with IEC 61260-1:2014 and IEC…
Wet storage of irradiated fuel and other radioactive materials
1.1
This Standard specifies requirements for the wet storage of irradiated fuel and other radioactive
materials requiring shielding or decay heat dissipation.
1.2
This Standard addresses the
a) design;
b) construction and commissioning;
c) operation; and
d) management
of the wet storage system:
Notes:
1) Design includes site selection.
2) Decommissioning is addressed in CSA N294.
1.3…
Radiological protection — Monitoring and internal dosimetry for staff members exposed to medical rad...
ISO 16637:2016 specifies the minimum requirements for the design of professional programmes to monitor workers exposed to the risk of internal contamination via inhalation by the use of radionuclides as unsealed sources in nuclear medicine imaging and therapy departments. It establishes principles for the development of compatible goals and requirements for monitoring programmes and, when…
