Search

Specifies a method for the determination of the compressive strength in the machine and cross directions of paper and board using a short span compression tester. Applies to papers and boards used for the manufacture of containers and boxes. May also be used for laboratory sheets prepared for the testing of pulp.

Intended for the semi-quantitative (i.e. ± 25%) determination of ethyl mercaptan odourant (within the range of 5 to 85 mg/L) in liquid propane. It is particularly appropriate to confirm that recently stenched propane is indeed odourized to the required level. The method is intended for field application, and may be suitable for use by non-laboratory personnel after suitable training. A…

1. Scope CAN/CSA-C22.2 No. 231.0-M89 - Electrical and Electronic Measuring and Test Equipment 1.1.1 This Standard applies to electrical, electronic, or electromechanical equipment designed to (a) measure or observe, and indicate quantities of (i) electrical, or (ii) electronic phenomena; or (b) supply (i) electrical, or (ii) electronic quantities for measuring or…

1. Scope 1.1 This Standard covers qualification of shop manufacturers of laminated structural timber pressure-glued by the use of clamps or mechanical means other than nailing. It does not certify the laminated timbers so produced. 1.2 This Standard sets forth requirements for determining the initial and continuing suitability of a plant's personnel, equipment, and procedures to…

This standard defines a test method and laboratory conditions so that the important parameters that affect the components are taken into account and describes how the specimen is set up for testing. The test method has been developed for prostheses that have a plane of symmetry and may not be suitable for other designs. The standard does not cover methods of examining and reporting of the test…

Guidance on the measurement of changings of the form, for instance wear and tear, creeping, plastic deformation, etc., and on available procedures when the test is performed in a simulator. Sensitivity, advantages, disadvantages and the measurement equipment of the different methods are compared in a table.

Specifies a method of determining the compressive and flexural strengths of cement mortar and describes the reference procedure. Allows the use of alternative procedures only in well defined cases. Covers laboratory and equipment, mortar constituents, preparation of mortar and test specimens, curing of test specimens, and test procedures.

Specifies recommended procedures for tool-life testing with cemented carbide tools used for face milling of steel and cast iron workpieces. Can be applied to laboratory as well as to production practice. Considers conditions as a result of which tool deterioration is due to wear. Establishes specifications for workpiece, tool, cutting fluid, cutting conditions, equipment, assessment of tool…

specifies recommended procedures for tool-life testing with high-speed steel tools used for end milling of steel and cast iron workpieces. Can be applied to laboratory as well as to production practice. Considers conditions under which tool deterioration is mainly due to wear. Establishes specifications for workpiece, tool, cutting fluid, cutting conditions, equipment, assessment of tool…

Procedure given applies to gases, such as propane, butane or mixtures thereof. It is suitable for sampling into containers to provide samples for laboratory testing of products covered by ISO 9162. Although this procedures can be used to provide samples for compositional analysis, it is strongly recommended that alternative apparatus, such as a variable-volume container, be used to minimize…