Microbiology of food and animal feeding stuffs — Guidelines on preparation and production of culture...
ISO/TS 11133-2:2003 sets criteria and methods for the performance testing of culture media. It applies to:
commercial bodies producing and/or distributing ready-to-use or semi-finished reconstituted or dehydrated media to microbiological laboratories;non-commercial bodies supplying media to third parties;microbiological laboratories preparing culture media for their own use and evaluating the…
Water quality — Sampling — Part 3: Guidance on the preservation and handling of water samples
ISO 5667-3:2003 gives general guidelines on the precautions to be taken to preserve and transport all water samples including those for biological analyses but not those intended for microbiological analysis.
These guidelines are particularly appropriate when spot or composite samples cannot be analysed on-site and have to be transported to a laboratory for analysis.
Adhesives — Guide to the selection of standard laboratory ageing conditions for testing bonded joint...
ISO 9142:2003 describes laboratory ageing conditions under which adhesive joints may be exposed to various environmental influences -- climatic or chemical -- for the purpose of assessing the effects of such influences on certain properties.
The ageing conditions are applicable to bonded assemblies and may be used to constitute a set of tests for the evaluation of an adhesive.
The results…
CAN/CSA-A3001-03 Cementitious Materials for Use in Concrete
1 Scope
1.1
This Standard addresses the following aspects of various cementitious materials:
a) their definitions;
b) their chemical, physical, and uniformity requirements;
c) the tests required;
d) the procedures for inspection and sampling; and
e) the units of measurement, packaging, marking, and storage.
1.2 The various…
Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
ISO 23794:2003 provides guidance on the determination of the abrasion resistance of vulcanized and thermoplastic rubbers. It covers both solid and loose abrasives.
The guidelines given in ISO 23794:2003 are intended to assist in the selection of an appropriate test method and appropriate test conditions for evaluating a material and assessing its suitability for a product subject to abrasion.…
Implants for surgery — Partial and total hip-joint prostheses — Part 10: Determination of resistance...
ISO 7206-10:2003 applies to femoral heads of partial or total hip-joint replacements of modular construction (i.e. a head/neck conical taper connection) and describes methods of determining the load required, under specified laboratory conditions, to cause failure of the head (disassembly or fracture). It applies to components made of metallic and non-metallic materials.
ISO 7206-10:2003 does not…
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncerta...
This technical report gives guidance on the treatment of uncertainties to those who are involved in the development or modification of CISPR electromagnetic compatibility (EMC) standards. In addition, this part provides useful background information for those who apply the standards and the uncertainty aspects in practice.
The objectives of this technical report are:
a) to identify the…
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test inv...
ISO 16701:2003 defines an accelerated corrosion test method to be used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or road de-icing salt.
ISO 16701:2003 specifies the test apparatus and test procedure to be used in conducting the accelerated corrosion test to simulate, in a…
Gears — Evaluation of instruments for the measurement of individual gears
ISO 18653:2003 specifies methods for the evaluation of measuring instruments used for gear measurements of involute, helix, pitch and runout. It is applicable both to instruments that measure runout directly and to those that compute it from index measurements. It also gives recommendations for the evaluation of tooth thickness measuring instruments and, of necessity, includes the estimation of…
Paints and varnishes — Performance requirements for protective paint systems for offshore and relate...
ISO 20340:2003 deals with the performance requirements for the protection, by protective paint systems, of new offshore and related structures exposed to the offshore atmosphere, as well as those immersed in sea or brackish water. ISO 20340 can also be used for other structures, provided that the selected paints or protective paint systems comply with this International Standard.
This…
