Search

ISO 20905:2004 sets out a laboratory procedure for the dust testing of higher rank coals. The procedure defines a means of evaluating the dust/moisture relationship characteristic of a coal and a dust extinction moisture (DEM).

Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of IEC 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. The standard defines…

ISO 11275:2004 specifies a laboratory method for the simultaneous determination in soils of the unsaturated hydraulic conductivity and of the soil water-retention characteristic. It is applicable only to measurement of the drying or desorption curve. Application of the method is restricted to soil samples which are, as far as possible, homogeneous. The method is not applicable to soils which…

ISO 4797:2004 specifies requirements for an internationally acceptable series of boiling flasks with conical ground joints for general laboratory purposes.

Preface This is the first edition of CSA PLUS 15189, The ISO 15189:2003 essentials. The primary objective of this handbook is to provide both novice and experienced quality management practitioners with a concise, user-friendly guide to understanding and implementing the requirements of ISO 15189:2003.

This National Standard of Canada is based on International Standard IEC 61010-1:2001, and is common with UL 61010-1. 1 Scope and object 1.1 Scope 1.1.1 Equipment included in scope This part of IEC 61010 specifies general safety requirements for electrical equipment intended for professional, industrial process, and educational use, any of which may incorporate computing devices, as defined in…

This National Standard of Canada is equivalent to International Standard IEC 61010-2-010:2003, second edition, 2003. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text by the following: This part of IEC 61010 applies only to electrically powered laboratory equipment for the heating of materials, where the…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-032:2002, second edition. 1 Scope and object This clause of part 1 is applicable, except as follows: 1.1 Scope Replacement: This International Standard applies to the HAND-HELD and hand-manipulated CURRENT SENSORS described below. These CURRENT SENSORS are for use in the measurement of current without…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-045:2000, first edition. 1 Scope and object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This International Standard applies to WASHER DISINFECTORS and other equipment incorporating washing and disinfection processes for the treatment of soiled items used in the medical,…

This National Standard of Canada is equivlent to International Standard IEC 61010-2-051:2003, second edition. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope Replacement: Replace the whole text by the following new paragraph: This part of IEC 61010 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and…