Search

1.1 These requirements cover thermoplastic pipe and fittings for use in wet pipe sprinkler systems for fire protection service. 1.2 Thermoplastic pipe and fittings covered by these requirements are intended for use in sprinkler systems in any of the following types of occupancies: a) Light hazard occupancies as defined in the Standard for Installation of Sprinkler Systems, NFPA 13; b)…

This document establishes a vocabulary of terms and semantics for all fields of respiratory care involving mechanical ventilation, such as intensive-care ventilation, anaesthesia ventilation, emergency and transport ventilation and home-care ventilation, including sleep-apnoea breathing-therapy equipment. It is applicable — in lung ventilator and breathing-therapy device standards, — in…

This document describes the test method for light stability and ozone stability for commercial prints, which are displayed in indoor bright places in or near to windows, especially in display windows with air conditioning. This document also provides guidelines for data analysis. This document is applicable to the various product classes of "commercial prints" that, following the…

1 Scope This document specifies the requirements and methods for the clinical investigation of me equipment used for the intermittent non-invasive automated estimation of the arterial blood pressure by utilizing a cuff. This document is applicable to all sphygmomanometers that sense or display pulsations, flow or sounds for the estimation, display or recording of blood pressure. These…

This document specifies general requirements and related test methods that are relevant to assistive products for tissue integrity (APTI) in the lying position in different application environments such as hospitals, home care and institutions. This document applies to the safety of APTI, which are intended to remain in situ during periods of lying, and to prevent and/or treat pressure injuries.…

ISO/IEC 14543-5-101:2019 (E) enables a media connection, resource sharing and co-operation among computers, home appliances and consumer electronics using remote access (RA). Also, users and devices can share and control media resources. This document specifies: • an IGRS remote media access profile based on the IGRS RA core protocol and the IGRS RA platform protocol, and •…

ISO/IEC 14543-5-101:2019 (E) enables a media connection, resource sharing and co-operation among computers, home appliances and consumer electronics using remote access (RA). Also, users and devices can share and control media resources. This document specifies: • an IGRS remote media access profile based on the IGRS RA core protocol and the IGRS RA platform protocol, and • application rules…

1 Scope 1.1 This Standard applies to newly produced vented decorative gas appliances (see Clause 3, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials and having input ratings up to and including 400,000 Btu/hr (117 228 W). These appliances are for: a) use with natural gas; b) use with propane; c) direct vent gas appliances for…

1 Scope 1.1 Application This Standard applies to single- and multi-section buildings supported on longitudinal floor beams, or perimeter rim joists designed to perform as beams. 1.2 Issues addressed This Standard specifies requirements for the following aspects of building installation: a) site preparation; b) permanent foundations; c) anchorage to resist overturning and pier toppling…

This part of the 80601 International Standard applies to the basic safety and essential performance of electroencephalographs as defined in 201.3.204, hereafter also referred to as me equipment or me system. This document is applicable to electroencephalographs intended for use in professional healthcare facilities, the emergency medical services environment or the home healthcare environment.…