Search

This National Standard of Canada is equivalent to International Standard ISO/IEC 13239:2000 (second edition, 2000-03-01). 1 Scope This International Standard specifies the frame structures, the elements of procedures, the classes of procedures, the content and format of the general purpose Exchange Identification (XID) frame, and a means for resolution/negotiation of a data link layer…

This International Standard is applicable to heavy-duty road vehicle engines subject to regulations as regards their exhaust emissions at the time of their certification. Mopeds, motorcycles, passenger cars and non-road vehicles are not within its scope. This International Standard defines the criteria making it possible to group those engines of the same manufacturer having, by design, similar…

SCSI provides a diverse range of peripherals for attachment to a wide range of computing equipment. Some system manufacturers have developed approaches for SCSI attachment which are widely followed, increasing the applications available for the attachment of SCSI peripherals. In markets where no standard method of attachment exists, however, variations between third party sellers have made it…

This part of ISO/IEC 8882 specifies a set of abstract tests for verifying that the implementation of X.25 protocols for use by Data Terminal Equipment (DTE), conforms to the requirements of International Standards that specify those protocols. Testing of a DCE is not subject of this test suite. Testing of a DTE in DCE mode is covered in test group 28 of this test suite a) specifies a PIXIT…

This part of ISO/IEC 8882 specifies a set of abstract tests for verifying that the implementation of X.25 protocols for use by Data Terminal Equipment (DTE), conforms to the requirements of International Standards that specify those protocols. Testing of a DCE is not subject of this test suite. Testing of a DTE in DCE mode is covered in test group 28 of this test suite a) specifies a PIXIT…

This International Standard specifies methods for the determination of puncture-impact properties of rigid plastics in the form of flat test specimens, such as discs or square pieces, under defined conditions. Specimens may be moulded directly, cut from sheets or taken from finished products. Different types of test specimens and test conditions are defined. These falling-dart methods are used to…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10609-40: 1995. 1 Scope 1.1 General ISO/IEC ISP 10609 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provide the connection-mode Transport Service using the connection-mode…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 12063-1:1997. 1 Scope 1.1 General This part of ISO/IEC ISP 12063 contains the overall specifications of the support of MHS Elements of Service and associated MHS functionality in an Electronic Data Interchange Messaging (EDIMG) environment which are generally not appropriate for consideration only from…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 12069-1:1996. 1 Scope 1.1 General ISO/IEC ISP 12069 defines a series of International Standardized Profiles for ISO/IEC 10166:1991 Document Filing and Retrieval (DFR). This part of ISO/IEC ISP 12069 contains the overall specifications of the DFR functionality which are generally not appropriate for…

This Guide is a joint publication of Ministry of the Environment, CSA International, and Automotive Parts Manufacturer's Association. 1. Scope 1.1 General This Guide provides direction on policy development; identifies common activities, aspects, and impacts; provides sample objectives and targets; identifies typical training requirements; and contains a checklist to track…