Search

Provides details of the test apparatus to be used for measuring smoke emission when electric or optical fibre cables are burnt under defined conditions, for example, a few cables burnt horizontally. The light transmittance (lt) under flaming combustion and smouldering conditions can be used as a means of comparing different cables or complying with specific requirements. NOTE: For the purposes of…

Provides details of the test procedure to be employed for the measurement of the density of smoke emitted from cables burning under defined conditions. It describes the means of preparing and assembling cables for test, the method of burning the cables, and gives recommended requirements for evaluating test results. The principal changes with respect to the previous edition are as follows: a)…

ISO/TS 14907-1:2005 specifies the test procedures of EFC road-side equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is specifically within the realm of EFC application. The scope of ISO/TS 14907-1:2005 is restricted to systems operating within the radio emission, EMC regulations, traffic and…

1 Scope 1.1 General 1.1.1 This Standard applies to (a) factory-made, air-source, air-sink, split-system, and single-package unitary air conditioners and heat pumps matching assemblies of the type classified in Clause 1.2 and intended for air-conditioning and space-heating applications in buildings; (b) through-the-wall single-package split-system and small-duct high-velocity central air…

ISO 11960:2004 specifies the technical delivery conditions for steel pipes (casing, tubing, plain end casing liners and pup joints), coupling stock and accessories and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2004. The requirements that define different levels of standard technical requirements for…

ISO/TS 20022-3:2004 explains the different steps a modeller should follow to ensure that ISO 20022 Business Components / Elements, Message Components / Elements, Business Transactions and Messages are defined in a consistent way. The ISO 20022 methodology is composed of a set of activities. These activities are grouped into the following phases: business analysis,requirements analysis,logical…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15444-6:2003. 1 Scope This International Standard defines a normative but optional file format for storing compound images using the JPEG 2000 file format family architecture. This format is an extension of the JP2 file format defined in ITU-T Rec T.800 | ISO/IEC 15444-1 Annex I and uses boxes defined for both the…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 10611-1:2003. 1 Scope 1.1 General This part of ISO/IEC ISP 10611 contains the overall specifications of the support of MHS Elements of Service and associated MHS functionality which are generally not appropriate for consideration only from the perspective of a single MHS protocol. These specifications…

This National Standard of Canada is equivalent to International Standard ISO/IEC 6592:2000. 1 Scope This International Standard gives guidelines for the documentation of information systems (ISs) and is intended for use in that area. This International Standard is applicable to the software of IS. However, some aspects of hardware, e.g. configuration of the system, are included. This…

This National Standard of Canada is equivalent to International Standard ISO/IEC ISP 12062-1:2003. 1 Scope 1.1 General This part of ISO/IEC ISP 12062 contains the overall specifications of the support of MHS Elements of Service and associated MHS functionality in an Interpersonal Messaging (IPM) environment which are generally not appropriate for consideration only from the perspective…