1.1
This Standard is intended to form the basis of a QMS within a health care or home setting for the purpose of providing safe, reliable kidney dialysis treatments.
Note: A comprehensive QMS can be achieved when this Standard is used in combination with the following related Standards:
a)
CAN/CSA-C22.2 No. 60601-1;
b)
CAN/CSA-C22.2 No. 60601-2-16;
c)
CAN/CSA-C22.2 No. 60601-2-39;
d)…
Mobile elevating work platforms — Safety principles, inspection, maintenance and operation
This International Standard applies to all mobile elevating work platforms (MEWPs) that are
intended to position persons, tools and materials and which, as a minimum, consists of a work
platform with controls, an extending structure and a chassis.
The technical safety requirements of this International Standard apply except where national or
local regulations are more stringent.
For related…
Mobile elevating work platforms — Operator (driver) training
This International Standard provides methods for preparing training materials and administering
standardized training to operators (drivers) of mobile elevating work platforms (MEWPs).
It is applicable to MEWPs, as defined in ISO 16368, intended to move persons, tools and materials to
positions where they can carry out work from the work platform.
NOTE National or other regulations, which…
Preparation of energy efficiency publications and the use of basic energy efficiency publications an...
IEC Guide 119:2017(E) defines procedures for the preparation of energy efficiency (EE) publications and describes the relationship between technical committees (TCs) with group EE functions.
In the context of this Guide, “EE” refers to energy efficiency of products, systems and organizations.
It uses the boundary concept to address energy efficiency aspects (see IEC Guide 118) in the context of…
Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutio...
ISO 6887-1:2017 defines general rules for the aerobic preparation of the initial suspension and of dilutions for microbiological examinations of products intended for human or animal consumption.
ISO 6887-1:2017 is applicable to the general case and other parts apply to specific groups of products as mentioned in the foreword. Some aspects might also be applicable to molecular methods where…
Intelligent transport systems — Cooperative ITS — Using V2I and I2V communications for applications ...
ISO/TS 19091:2017 defines the message, data structures, and data elements to support exchanges between the roadside equipment and vehicles to address applications to improve safety, mobility and environmental efficiency. In order to verify that the defined messages will satisfy these applications, a systems engineering process has been employed that traces use cases to requirements and…
Petroleum and natural gas industries — Well integrity — Part 1: Life cycle governance
ISO 16530-1:2017 is applicable to all wells that are operated by the petroleum and natural gas industry. This document is applicable to any well, or group of wells, regardless of their age, location (including onshore, subsea and offshore wells) or type (e.g. naturally flowing, artificial lift, injection wells).
ISO 16530-1:2017 is intended to assist the petroleum and natural gas industry to…
1.1
This Standard applies to single conductor cables and multi-conductor cables, without metal sheath or armour, suitable for use in cable trays and other applications when installed in accordance with the Canadian Electrical Code, Part I.
1.2
The test and marking requirements of this Standard are in addition to the basic requirements for cable construction that appear in other published CSA…
Size designation of clothes — Part 1: Anthropometric definitions for body measurement
ISO 8559-1:2017 provides a description of anthropometric measurements that can be used as a basis for the creation of physical and digital anthropometric databases. The list of measurements specified in this document is intended to serve as a guide for practitioners in the field of clothing who are required to apply their knowledge to select population market segments and to create size and shape…
Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length
IEC 60793-1-60:2017 defines test methods for both the phase beat length, and the group beat length. These two parameters are defined differently, and will give different results depending on the type of polarization-maintaining (PM) fibre. The phase beat length is the relevant parameter for the fibres ability to maintain a high extinction ratio. This is described in more details in Annexes A and…