Search

ISO/IEC 25024:2015 defines data quality measures for quantitatively measuring the data quality in terms of characteristics defined in ISO/IEC 25012. ISO/IEC 25024:2015 contains the following: - a basic set of data quality measures for each characteristic; - a basic set of target entities to which the quality measures are applied during the data-life-cycle; - an explanation of how…

ISO/IEC 25024:2015 defines data quality measures for quantitatively measuring the data quality in terms of characteristics defined in ISO/IEC 25012. ISO/IEC 25024:2015 contains the following: - a basic set of data quality measures for each characteristic; - a basic set of target entities to which the quality measures are applied during the data-life-cycle; - an explanation of how…

The following deviations are intended to meet Canadian product requirements and to align with the Canadian Electrical Code, Part I. International Standard IEC 61010-2-101:2015 (second edition) forms the basis for CAN/CSA-C22.2 No. 61010-2-101, which contains the following deviations in addition to those shown in CAN/CSA-C22.2 No. 61010-1:12. Les exigences propres au Canada qui suivent…

Replace the text in 1,1 by the following paragraph: This part of IEC 61010 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and stirring, where mechanical energy influences the shape or size or homogeneity of materials and their accessories. Such devices may contain heating elements. NOTE If all or part of the equipment falls within the…

ISO 13350:2015 deals with the determination of those technical characteristics needed to describe all aspects of the performance of jet fans as defined in ISO 13349. It does not cover those fans designed for ducted applications, nor those designed solely for air circulation, e.g. ceiling fans and table fans. The test procedures described in this International Standard relate to laboratory…

ISO 10650:2015 specifies requirements and test methods for powered polymerization activators in the 385 nm ? 515 nm wavelength region intended for chairside use in polymerization of dental polymer-based materials. This International Standard applies to quartz-tungsten-halogen lamps and light-emitting diode (LED) lamps. Powered polymerization activators could have internal power supply (…

ISO 17621:2015 specifies requirements and test methods under prescribed laboratory conditions for length-of-stain detector tubes and their associated pump (detector tube measurement system) used for short-term measurements of the concentration of specified chemical agents in workplace air. ISO 17621:2015 is not applicable to measurements made to demonstrate compliance with long-term limit values…

ISO 9838:2015 defines test soles representing - an alpine ski-boot (form A) or at least the bottom part of it to be used for testing alpine ski-bindings for alpine skiing in accordance with ISO 9462 and ISO 9465, and - a touring ski-boot (form T) or at least the bottom part of it to be used for testing touring ski-bindings for touring skiing in accordance with ISO 13992 and ISO 9465.…

1.1 This Standard applies to all types of laboratory fume hoods, except for ductless fume hoods. Note: Ductless fume hoods should not be considered acceptable substitutes for ducted fume hoods. Some jurisdictions prohibit use of ductless fume hoods with certain chemicals. For these reasons, ductless fume hoods have not been included in this Standard. 1.2 This Standard specifies a) safety…

1.1 This Standard specifies requirements for the packaging, collection, handling, storage, and on-site treatment and disposal of health care waste materials. 1.2 1.2.1 This Standard applies to health care and veterinary–related waste, and health care–related waste generated in non-traditional health care settings. 1.2.2 “Health care and veterinary” refers to a) health care facilities and…