Search

This document specifies methods for the laboratory determination of the water flow characteristics in soil. This document is applicable to the laboratory determination of the coefficient of permeability of soil within the scope of geotechnical investigations. NOTE This document fulfils the requirements of the determination of the coefficient of permeability of soils in the laboratory for…

1 Scope This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I (see Figure 1 for a schematic representation). This standard does not include…

1 Objet La présente Norme nationale du Canada définit les exigences relatives à l’équipement, aux critères de rendement, à la procédure à suivre et aux méthodes d’essai pour la mise en place de systèmes de récupération des vapeurs (SRV) dans les réseaux de distribution d’essence comprenant des terminaux, des dépôts routiers, des stationsservice et des camions-citernes qui sont couramment…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text with the following: This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of their publications for products…

This document specifies the requirements for competence to carry out reference measurement procedures in laboratory medicine, using the requirements of ISO/IEC 17025:2017 as a normative reference and listing additional requirements for calibration laboratories to perform their tasks adequately. The relationship between clauses in this document and ISO/IEC 17025:2017 are summarized in Annex A.…

This document specifies procedures for the laboratory determination of the total elemental sulfur and the sulfate half-ester content of cellulose nanocrystals (CNCs) by inductively coupled plasma-optical emission spectroscopy and conductometric titration, respectively, including sample preparation, measurement methods and data analysis. This document is applicable to the characterization of CNCs…

This document gives guidelines on the handling, documentation, storage and processing of formalin-fixed and paraffin-embedded (FFPE) tissue specimens intended for DNA examination during the pre-examination phase before a molecular assay is performed. This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests performed by medical laboratories and…

IEC TR 60601-4-3:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC TR 60601-4-3:2018 contains a series of recommendations developed by an expert working group of IEC…

This document describes a method for the determination of the flat crush resistance of a corrugating medium after laboratory fluting using an A-flute geometry. The procedure is applicable to any corrugating medium intended to be used, after fluting, in the manufacture of corrugated board. NOTE ISO 7263-2 describes a method to determine the flat crush resistance using a B-flute geometry.

IEC TR 60601-4-3:2018 contains a series of recommendations developed by an expert working group of IEC subcommittee 62A in response to questions of interpretation of IEC 60601-1:2005 and related collateral standards in the IEC 60601 series. IEC TR 60601-4-3:2018 is primarily intended to be used by: – manufacturers of medical electrical equipment; – test laboratories and others responsible for…