Paper and pulp — Deinkability test for printed paper products
This document specifies a basic laboratory test method for deinkability, applicable to any kind of printed paper product, under alkaline conditions by means of single stage flotation deinking and fatty acid-based collector chemistry.
Measurement of radioactivity in the environment — Soil — Part 5: Strontium 90 — Test method using pr...
This document describes the principles for the measurement of the activity of 90Sr in equilibrium with 90Y and 89Sr, pure beta emitting radionuclides, in soil samples. Different chemical separation methods are presented to produce strontium and yttrium sources, the activity of which is determined using proportional counters (PC) or liquid scintillation counters (LSC). 90Sr can be obtained from…
Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the ...
1.1 This document
— amplifies the general principles for designing experiments for the numerical estimation of the precision of measurement methods by means of a collaborative interlaboratory experiment;
— provides a detailed practical description of the basic method for routine use in estimating the precision of measurement methods;
— provides guidance to all personnel concerned…
Metallic powders — Determination of envelope-specific surface area from measurements of the permeabi...
This document specifies a method of measuring the air permeability and the porosity of a packed bed of metal powder, and of deriving therefrom the value of the envelope-specific surface area. The permeability is determined under steady-state flow conditions, using a laminar flow of air at a pressure near atmospheric. This document does not include the measurement of permeability by a constant…
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle a...
This document specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power-driven angle and vertical grinders. It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with a specified test wheel and run under no‑load conditions. The method has been established for surface grinding tasks…
Guidance for supervisors and operators of point-of-care testing (POCT) devices
This document gives guidance for supervisors and operators of point-of-care testing (POCT) services where POCT is performed without medical laboratory training, supervision or support. It includes the key components that should be considered to provide safe and reliable POCT results.
Self-testing is excluded from this document.
Measurement of radioactivity in the environment — Soil — Part 1: General guidelines and definitions
This document specifies the general requirements to carry out radionuclides tests, including sampling of soil including rock from bedrock and ore as well as of construction materials and products, pottery, etc. using NORM or those from technological processes involving Technologically Enhanced Naturally Occurring Radioactive Materials (TENORM) e.g. the mining and processing of mineral sands or…
Water quality — Detection and enumeration of thermotolerant Campylobacter spp
This document specifies a method for the detection, semi-quantitative and quantitative (MPN) enumeration of thermotolerant Campylobacter species.
The method can be applied to all kinds of waters including: drinking water, ground water and well water, fresh, brackish and saline surface water, swimming pools, spa and hydrotherapy pools, recreational waters, agricultural waters and runoff,…
Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading ...
This document describes an index test procedure for simulating mechanical damage to geosynthetics, caused by granular material, under repeated loading. The damage is assessed visually and by the loss of tensile strength.
Other reference tests can be used to assess the damage caused by this test. The test method described is an index test procedure, using a standard granular material, and is not…
Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 4: Laborat...
This document defines standardized and repeatable test procedures for the evaluation of blowby oil aerosol separators and filtering devices and specifies laboratory fractional separation efficiency in both open and closed crankcase ventilation systems.
Filter life is not evaluated in this document.
The conditioned portion of this test only applies to filters that can meet the Dp stability…
