Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2:...
ISO 16784-2:2006 applies to corrosion and fouling in industrial cooling water systems
ISO 16784-2:2006 describes a method for preliminary evaluation of the performance of treatment programmes for open recirculating cooling water systems. It is based primarily on laboratory testing but the heat exchanger testing facility can also be used for on-site evaluation. ISO 16784-2:2006 does not include…
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
ISO 4892-4:2013 specifies methods for exposing specimens to open-flame carbon-arc lamps in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments in daylight or daylight filtered through window glass.
Truck and bus tyres — Verifying tyre capabilities — Laboratory test methods
Of the test methods presented (strength test for the structure, endurance test), only some may be required depending on the type of tyre to be tested. The tests are carried out in a laboratory under controlled conditions. Applies to all truck and bus tyres.
Textile floor coverings — Water impermeability test
ISO 20251:2016 specifies a laboratory test method for determining the water impermeability of textile floor coverings.
This method cannot be used to characterize a wall-to-wall installation of textile floor covering tiles.
Water quality — Estimation of measurement uncertainty based on validation and quality control data
This International Standard specifies methods for the estimation of measurement uncertainty of chemical and
physicochemical methods in single laboratories based on validation data and analytical quality control results
obtained within the field of water analysis.
NOTE 1 The principles of the estimation of uncertainty specified in this International Standard are consistent with the
principles…
Health informatics — Guidelines for exchanging data generated by portable polymerase chain reaction ...
This document identifies use cases related to the exchange of information between new small-sized point of care testing devices that enable real time PCR testing for diagnosis of infectious diseases, and clinical laboratories.
This document is applicable to use cases of small-sized real time PCR devices, including those that:
a) general test;
b) lack of patient information;
c) cancel and rerun…
Paper and Pulp — Deinkability test for printed paper product mixtures containing woodfree printed pa...
This document specifies a basic laboratory test method for deinkability of woodfree printed paper products under alkaline conditions by means of single stage flotation deinking and fatty acid-based collector chemistry. The woodfree printed paper product of interest is tested as a mixture containing 10% by weight of the woodfree printed paper with the balance comprising a mixture of mechanical…
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods...
This document specifies a test method for investigating the oxidative stability of ultra-high-molecular-weight polyethylene (UHMWPE) moulded forms as a function of processing and sterilization method. This document describes a laboratory method for accelerated ageing of specimens taken from UHMWPE moulded forms or forms fabricated from these for use in the manufacture of surgical implants. The…
Medical electrical equipment — Part 2-61: Particular requirements for basic safety and essential per...
ISO 80601-2-61:2017 applies to the basic safety and essential performance of pulse oximeter equipment intended for use on humans, hereafter referred to as me equipment. This includes any part necessary for normal use, including the pulse oximeter monitor, pulse oximeter probe, and probe cable extender.
These requirements also apply to pulse oximeter equipment, including pulse oximeter monitors,…
Flexible and rigid cellular polymeric materials — Accelerated ageing tests
This document specifies, for flexible and rigid cellular polymeric materials, laboratory procedures which are intended to imitate the effects of naturally occurring reactions such as oxidation or hydrolysis by humidity. The physical properties of interest are measured before and after the application of the specified treatments.
Test conditions are only given for open cellular latex, both open-…
